POWER SOURCES
CLOCK OPERATION
To operate the clock, one (1) AA battery must be installed as follows:
1. Remove the battery compartment door on the bottom of the unit by inserting a small screwdriver, paper clip or
similar item into the tab while gently pushing, then lifting it out.
2. Insert one (1) AA battery (not
included) as shown at the right and according to the polarity
diagram. Alkaline batteries are recommended for longer playing time.
ALARM AND RADIO OPERATION
The alarm and radio can be powered by either two (2) AA batteries or an AC adapter (not included).
BATTERY OPERATION
1.Remove the battery compartment door on the bottom of the unit by inserting a small screwdriver, paper clip or similar item into the tab while gently pushing, then lifting
it out. | 2 |
2. Insert two (2) AA batteries (not | |
included) as shown at the right |
|
and according to the polarity |
|
diagram. First insert the battery |
|
labeled “1”, and then the battery | 1 |
labeled “2”. Alkaline batteries are recommended for longer playing time.
7