iHome iP47 manual Trouble Shooting, Symptom Possible Problem Solution

Page 15

Trouble Shooting

Symptom

Possible Problem

Solution

Unit doesn’t respond

AC adaptor isn’t plugged to a wall outlet or

Plug the AC adaptor into a wall outlet and plug the connector into

(no power)

the connector is not plugged into the power

the AC jack on the unit

 

supply jack on the back of the unit.

 

 

 

 

 

Wall outlet is not functioning

Plug another device into the same wall outlet to confirm the outlet

 

 

is working. If the outlet is controlled by a switch, check that the

 

 

switch is ON.

 

 

 

 

Power is off

Press the Power button on the iP47

 

 

 

Can’t play Bluetooth

Device does not support the A2DP and

While you need the A2DP and AVRCP Bluetooth profiles to stream

music from cellphone

AVRCP Bluetooth profiles

music to the iP47, you can still use the handsfree speaker phone

or other Bluetooth

 

functionality

devices

Device and iP47 are not paired AND linked

Make sure your phone supports the A2DP and AVRCP Bluetooth

 

 

profiles before linking/pairing. The iP47 defaults to the last linked

 

 

device, so a new device may need to be linked from the device

 

 

itself (see your device’s user guide).

Can’t play my iPhone

iPhone does not support the A2DP profile

Dock iPhone in iP47 to listen to music

music via Bluetooth

 

 

Bluetooth device

iP47 charges iPhone and docking iPod

Make sure your device is plugged into a working charger

didn’t charge up

models only, not other devices

 

 

 

 

Sound is distorted

Volume level is set too high

Decrease the volume

 

 

 

If original sound source is poor quality, distortion and noise are

 

 

 

Sound source is distorted

easily noticed with high-power speakers.

 

 

 

 

Try setting EQ to flat on your iPhone, iPod or Bluetooth device

 

 

 

Bluetooth music is

Bluetooth device is out of range of iP47

Move your Bluetooth device within 30 feet of the iP47

broken up

 

 

Can’t hear caller’s

Bluetooth device is out of range of iP47

Move your cell phone closer to iP47

voice

Volume on iP47 is too low

Raise volume on iP47

 

 

 

Remote Control

Batteries are weak/ dead

Replace with new battery

 

 

doesn’t work

 

 

Remote Control is too far way from main unit

Move the Remote Control closer to main unit

 

 

 

 

My Bluetooth

Headsets and other receivers will not pair

Pair headset directly with phone or other transmitting device

headset won't pair

with the iP47

 

with the iP47

 

 

Others can't hear

You are too far from iP47 microphone

The mic is near the Snooze Button. Move closer to the iP47.

my voice/voice isn't

 

 

 

 

clear to listener

Mic is muted/ Mute operation is on

Press the Mute button to release mute

 

 

 

12

Image 15
Contents Bluetooth Alarm Clock Radio For iPhone / iPod Maintenance Table of ContentsGetting Started FCC InformationIPod/Bluetooth/ Radio/Line PowerPair Your Bluetooth-enabled Phone With The iP47 Setting the Time Zone8iPhone/iPod InsertsIP47 Display Controls and IndicatorsSetting Time and Calendar Using the iP47Connecting the iP47 to Power Source Setting Up the iP47Sure Alarm Using the AlarmsSetting the Alarms Resetting the Alarm to Come on the Next DayListening to Radio Setting up the AntennasTuning and Playing the Radio Listening to iPhone or iPodListening to other portable audio devices Listening to Bluetooth MusicPairing Playing Bluetooth MusicMaking Calls with a Bluetooth Mobile Phone Sleep OperationDimmer Operation Remote Control Replacing the Remote Control Battery Install Clock Backup BatteryConsumer Guide to Product Safety Symptom Possible Problem Solution Trouble ShootingTrouble Shooting Síntoma Causa posible Solución Solución De ProblemasLa música con Limited 90-Day Warranty Information IP47 Pairing & Linking Your Bluetooth Device with the iP47