Charging Your iPHONE or iPOD

REVIEWING AND RESETTING THE ALARM

Press and release the Alarm Button at any time to review the current alarm settings. To toggle the alarm on or off, press the Alarm Button as needed. When the alarm icon is displayed, the alarm is armed/on.

Press the Power Button or Alarm Button when the alarm is sounding to reset it to come on again at the same time the next day. Press the

Alarm Button again to turn off/disarm the alarm. The alarm icon will disappear.

1.Gently dock your iPhone or iPod into the flexible Lightning dock located on the top of the unit OR connect an iPhone or iPod to the USB dock on back of unit using the cable that came with your device.

While your iPhone/iPod is docked in the unit and/or connected via the USB dock and the unit is connected to AC power, it recharges (until fully charged). The unit will not overcharge your iPhone/iPod. Note that non-docking iPod models will NOT charge.

Note: Please make sure your iPhone/iPod is properly docked into the unit. Failure to do so may damage your iPhone/iPod.

LISTENING TO YOUR iPHONE/iPOD

USING THE LIGHTNING DOCK OR USB DOCK

USING THE LIGHTNING DOCK

1.Dock your already playing iPhone/iPod. The unit will automatically turn on and you will hear the music playing from your iPhone/iPod. The iPhone/iPod Icon will appear at the right side of the display, indicating iPhone/iPod playing mode.

2.Press the or Buttons on the unit to adjust the system volume. Note: If the volume is too low on the iPhone/iPod, the unit may not detect

that the iPhone/iPod is in play mode. Press the Dock Button to play it. Press again as needed to pause and resume play.

3Press the + or – Buttons to go to the next or previous track (hold to scan backwards or forwards within a track).

4.Press the Power Button to turn off the unit. You can also turn the unit off by undocking a playing device.

NOTE: Press the Mode Button to cycle from iPod (Lightning dock) to USB to FM radio modes.