iPod Operation
Using the iPod dock feature of the i525
1)There is a selection of inserts included with the i525. These inserts fit various iPod models. Install the insert that best fits your iPod, or use the insert included with your Apple iPod.
Make sure the insert snaps into the recess. The top of the insert should be flush with the top of the i525.
2)Attach your iPod to the dock connector.
3)Select the iPod as a music source by pressing PLAY / PAUSE (remote or top panel).
4)Use the iPod navigation buttons on the remote control to operate your iPod while it is docked in the i525.
1) Install the dock insert that fits your iPod.
2) Connect your iPod.
i525 Top Panel
3) Select Play / Pause
i525 Remote Control
Notes:
To wake a hibernating iPod, push PLAY / PAUSE on the i525 remote control or top panel.
The i525 will not control a connected iPod while the i525 is in STANDBY.
The i525 controls iPod functions of a docked iPhone or iPod touch. After docking one these models, it may be necessary to manually “unlock” and select the iPod function before the i525 remote control can be used.
12
| iPod |
|
V O LU M E |
|
|
|
| ENTER |
S E L E C T | M E N U |
|
S O U R C E | S E E K | TUNE |
4)Use these iPod buttons to operate your iPod.