Akai AR170D manual Cleaning and maintenance, Snooze alarm

Page 17

Snooze alarm

The default snooze time is: 9 minutes.

To snooze the alarm, press the SNOOZE button (5) once. The alarm sounds again after the snooze time has elapsed.

To stop the alarm, press the ON/OFF button (1). The alarm is automatically set for the next day.

Set the snooze alarm

Press and hold the SNOOZE button (5).

Press the FWD button (4) or the REV button (3) to set the snooze time (1-30 minutes).

Release the SNOOZE button (5). The snooze time is set.

Set the NAP function

In this function the alarm can be set quickly for a short period of time. This function is available in tone mode.

Press the NAP button (19). The NAP indicator (12) flashes.

Press the FF button (4) or the REV button (3) to set the nap time (10-120 minutes).

Press the NAP button (19) to confirm the selection. The NAP indicator

(12)is ON.

To cancel the NAP function, hold the NAP button (19) until the NAP indicator (12) is OFF.

6.Cleaning and maintenance

!WARNING

Before performing any cleaning or maintenance, switch off and unplug the appliance.

Clean the outside of the appliance with a soft cloth. When the appliance is very dirty, dampen the cloth slightly with water and a neutral solution.

10

Image 17
Contents Radio CU Ceas Pregatirea Pentru Folosire Siguranta FolosireInstalarea Backup BateriiSetarea Timpului FunctiiOperare Alarma Snooze Functia AlarmaSetarea Alarmei Snooze Functiile RadioSetare Functiei NAP ProblemeCuratarea SI Intretinerea Date TehniceAkai Clock Radio Copyright notice Table of contentsIntended use SafetyLabels in this manual General safety instructions Unpacking Package contentsPreparations for use Installation Install batteries Battery backupFunctions Radio functions OperationSet the time Clock functions Alarm functionSnooze alarm Cleaning and maintenanceTechnical data TroubleshootingDisposal of used electrical and electronic equipment Clock Radio Table of contents Safety Preparations for use Installation Battery backup Functions Operation Clock functions Cleaning and maintenance Troubleshooting Disposal of used electrical and electronic equipment