FCC Compliance

CAUTION:

— continued

•Do not use solvents or cleaners containing abrasives or ammonia-based cleaners on this product. After cleaning, all moisture should be properly wiped away and dried before restoring power.

•Avoid placing this product in areas that are dusty, humid/moist, lack ventilation or are subject to constant vibration.

•After cleaning, properly wipe and dry the lamp prior to restoring power.

•Do not place near heat sources such as radiators, heat registers, stoves or any other apparatus (including amplifiers) that produce heat.

•Modifications not authorized by the manufacturer will void the warranty and may result in personal injury.

SAVE THESE INSTRUCTIONS

This device complies with part 15 of the FCC Rules. Operation is subject to these two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interfer- ence that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of these measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.