Playing the Radio, Playing the MP-3 / Aux Line-in

Playing the Radio

1.There are two ways to turn on the radio. Press one of the Radio Preset Buttons to listen to one of the preset stations, or press the H Music On/Off Button. The radio frequency will appear on the display.

2.Set the AM or FM band by pushing the S Radio Band Button to AM or FM.

3.Press either the 4 Radio Tuner - or G Radio Tuner + Button to find the station. Hold either button for a few seconds to scan the dial quickly.

Note:

•Extend the wire antenna for better FM reception.

•MP-3 Player may cause interference the radio reception. If interference occurs, turn off and unplug MP-3 Player from the radio.

4.Press 6 Volume + Button or 5 Volume - Button to adjust volume level.

5.Press H Music On/Off Button to Off to shut off radio.

Playing the MP-3 / Aux Line-in

1.Connect your CD / MP-3 Player or other devices to the MP-3 / Aux Line-in Plug.

2.Press the N MP-3 / Aux Line-in Button. 'AU' will appear on the display.

3.Press 6 Volume + Button or 5 Volume - Button to adjust volume level.

Note: To avoid distortion of sound, always set the volume level of the auxiliary device to a low or middle position, and adjust the desired volume level from the radio.

4. Press H Music On/Off Button to Off to shut off unit.

Adjusting the Display Backlight

This alarm clock radio features an adjustable display backlight, with dim, medium, and bright settings. To select a backlight setting, press the 1 Snooze / Dimmer Bar until desired brightness is reached.