Operating the Dual Alarm System

This clock radio features a dual alarm system, with two alarms that can be operated independently. The alarms can be set to wake two people at different times, or to have a main alarm and a backup. One alarm features your choice of radio stations as an alarm wake sound, while the second features a nature sound or buzzer as an alarm wake sound. You can set the radio alarm, the nature sound/buzzer alarm, or both alarms.

Setting the Alarm 1 for AM/FM Radio

1.Press and hold the 2 Radio Alarm 1 Button. The display will flash and the Radio Alarm Indicator will appear. If you do not begin setting the time within ten seconds of pressing the button, the display will stop flashing and you will need to press the 2 Radio Alarm 1 Button again.

2.While the display flashes, press the 1 Reverse and 6 Forward Buttons to set the wake time. Hold a button for a few seconds to set the time rapidly. Be sure to set the correct AM/PM time, as shown by the PM Indicator.

3.After setting the radio alarm time, while the display is still flashing you will need to select the station. First, press the L Mode/DST Button to select a radio frequency. Next, select a station using the M Memory Set 1-6 Buttons. For more information on programming radio stations into memory, see the Programming Radio Station Settings section of this manual. Rotate the O Volume Thumbwheel to set the wake sound volume.

4.After setting the radio alarm wake time and sound, you will need to select the 7-5-2 setting. The 7-5-2 setting lets you set the alarm for a full week, weekdays only, or the weekend. Before setting the alarm, be sure that the correct date is set, as shown in the “Auto-Set” and Manual Time and Date Settings section of the manual. While the display is still flashing, press the 9 Date/7-5-2 Button until the desired setting is shown.

5.After you have set the radio alarm wake time, sound, and 7-5-2 setting, press the 4 Enter Button. The Radio Alarm Indicator will appear on the display, showing that the radio alarm has been set.

Setting Alarm 2 for Nature Sounds/Buzzer

1.Press and hold the 7 Nature Sounds/Buzzer Alarm 2 Button until the Alarm 2 settings and Sounds Alarm Indicator appear on the display.

2.Press the 1 Reverse or 6 Forward Button to set the Alarm 2 time.

3.Use the L Mode/DST Button to select a nature sound or the buzzer to wake to. There is a choice of five sounds:

Sound #1: Ocean Surf

Sound #2: Birds

Sound #3: Brook

Sound #4: Wind Chimes

buz: Buzzer

4.See Note #4 in the Setting Alarm 1 section for instructions on setting the 7-5-2 alarm setting for Alarm 2.

5.After you have programmed the Alarm 2 settings, press the 4 Enter Button or wait ten seconds to return to the clock display. The Sounds Alarm Indicator will appear on the display, showing that the alarm is set.