Timex T237 manual Adjusting the Display Brightness, Setting Clock Time

Page 9

Adjusting the Display Brightness

1.This unit features the option of selecting either a bright or dim clock display. To set a bright clock

display, slide the Dimmer Switch, located on the back of the unit, to “Hi.” To set a less-bright clock display, slide the Dimmer Switch to “Lo.”

Setting Clock Time

1.

Slide the Alarm Set/Time Set Button to the TIME position.

 

2.

Set the clock time using the Fast Forward Button and the

Slow Rewind Button. The best

 

method of setting the clock is advancing the time rapidly using the

Fast Forward Button until it is a few

 

minutes past the desired time, then using the Slow Rewind Button to reach the desired time. To

 

reverse the time setting at a high speed, press and hold both buttons simultaneously. Remember to set the

 

correct AM or PM alarm time, as shown by the PM Indicator on the display.

3.

After setting the time, slide the Alarm Set/Time Set Button to the OFF position.

9

Image 9
Contents Dual Alarm Clock Radio Risk of Electric Shock Do not Open Consumer Guide to Product Safety Important Safety InstructionsConsumer Guide to Product Safety Table of Contents Maintenance Sure Alarm Battery Backup InstallationControls and Indicators LCD Display Setting Clock Time Adjusting the Display BrightnessSleeping to Radio Listening to RadioOperating the Snooze Feature Operating the AlarmsLimited 90-Day Warranty Information