Engineered Features, Optional Product Features

THE WALL-MOUNT™ ONE TON AIR CONDITIONER

W12A	60Hz
10,800 Btuh	9.00 EER

Right Side Control Panel

GREEN REFRIGERANT

R-410A

The Bard Wall-Mount One Ton Air Conditioner is a self contained energy efficient heating and cooling system, which is designed to offer maximum indoor comfort at a minimal cost without using valuable indoor floor space or outside ground space. The One Ton is the ideal product for versatile applications such as: new construction, modular offices, school modernization, telecommunication structures, portable structures or correctional facilities. Factory or field installed accessories are available to meet specific job requirements.

Engineered Features

Aluminum Finned Copper Coils Grooved tubing (evaporator coil only) and enhanced louvered fin for maximum heat transfer and energy efficiency.

Quiet Twin Blowers:

Designed to accept full ducted system or for non-ducted free blow installations.

High Efficiency Rotary

Compressor

R-410A Refrigerant:

Designed with R-410A (HFC) non-ozone depleting refrigerant in compliance with the Montreal protocol and 2010 EPA requirements.

Liquid Line Filter Drier:

Standard on all units. Protects system against moisture.

Galvanized 20 Gauge Zinc Coated Steel Cabinet:

Cleaned, rinsed, sealed and dried before the polyurethane primer is applied. The cabinet is handsomely finished with a baked on textured enamel, which allows it to withstand 1000 hours of salt spray tests per ASTM B117-03.

Electrical Components:

Are easily accessible for routine inspection and maintenance through a right side, service panel opening.

One Inch, Disposable Air Filter: Easily removed for replacement from the outside. Optional two-inch pleated filter, factory or field installed.

Top Rain Flashing:

Standard feature on all models.

Slope Top:

Standard feature for water run-off.

Compressor Control Module: Standard on all units. Built-in off-delay timer adjustable from 30 seconds to 5- minutes. 2-minute on-delay if power interrupt. 120-second bypass for low pressure control, and both soft and manual lockouts for high and low pressure controls. Alarm output for alarm relay.

High & Low Pressure Switches are Auto-Reset:

Standard on all units. Built-in lockout circuit resets from the room thermostat. Provides commercial quality protection to the compressor.

Barometric Fresh Air Damper: Allows up to 100 CFM of fresh air.

Automatic Condensate

Disposal System:

Eliminates the need to provide a separate condensate drain. The drain valve closes at temperatures above 40° and opens when the temperature drops below 40°. Built-in slinger ring fan blade.

Full Length Mounting Flanges: Built into cabinet for improved appearance and easy installation.

Optional Product Features

Alarm Relay:	Fully Modulating Economizer:
Dry contacts for remote alarm on	Can be factory or field installed.
high or low pressure lockouts.
	Commercial Room Ventilator:
Low Ambient Control:	Can be factory or field installed.
Permits operation down to 0°F
outdoor ambient. Can be factory
or field installed.

•Complies with efficiency requirements of ANSI/ASHRAE/IESNA 90.1-2010.

•Certified to ANSI/ARI Standard 390-2003 for SPVU (Single Package Vertical Units).

•Intertek ETL Listed to Standard for Safety Heating and Cooling Equipment ANSI/UL 1995/CSA 22.2 No. 236-05, Fourth Edition.

•Commercial Product - Not intended for Residential application.

Form No.	S3401-812
Supersedes	S3401-510
Page	1 of 8

W12A specifications

The Bard W12A is an advanced solution designed to seamlessly integrate into various outdoor environments. This innovative system stands out for its blend of technological sophistication and user-friendly design, making it an invaluable asset for both residential and commercial users.

One of the main features of the Bard W12A is its powerful performance. This system is equipped with a robust engine that ensures efficient operation, providing users with consistent power output while maintaining low energy consumption. This characteristic not only enhances the overall functionality but also contributes to significant cost savings over time, making it an eco-friendly option.

The Bard W12A boasts an impressive array of technologies aimed at improving user experience and system reliability. Among these, smart connectivity stands out. The integration of IoT capabilities allows users to monitor and control the system remotely, providing real-time data and insights. This functionality is particularly beneficial for monitoring performance metrics and ensuring the system operates at peak efficiency.

Another notable characteristic of the Bard W12A is its durable construction. Built to withstand harsh weather conditions, the system is designed from high-quality materials that ensure longevity and reliability. Its rugged design not only enhances performance but also minimizes the need for frequent maintenance, making it a hassle-free option for users.

The user interface of the Bard W12A is intuitive and accessible, allowing for easy navigation through various features and settings. This ease of use extends to installation and setup, making it suitable for users with varying levels of technical expertise.

Furthermore, energy efficiency is at the core of the Bard W12A’s design. The system leverages the latest in energy-saving technologies, such as advanced thermal management and optimized energy consumption profiles. This makes it an excellent choice for users looking to reduce their environmental footprint while enjoying reliable performance.

In summary, the Bard W12A stands as a testament to modern engineering, combining powerful performance, advanced technology, and user-centric design. Its smart features, durable construction, and energy efficiency make it a leading option for anyone seeking a dependable outdoor solution. Whether for everyday use or specialized applications, the Bard W12A is poised to meet and exceed expectations.