Sentry Industries CR105 Power Connection, Radio Operation, HOW to SET the Clock

Page 8

POWER CONNECTION

Plug the AC POWER CORD to the household outlet. Make sure the voltage is correct for safety purpose and prevent plausible damages to the set. Connect one 9 volt battery (not included) to the battery terminals in the BATTERY COMPARTMENT. It maintains the clock function whenever the AC power is interrupted.

REMARK: The time display will not exhibit during power failure. But the clock display will continue at the correct time once the main power supply is resumed.

RADIO OPERATION

1.Set the FUNCTION SWITCH to “ON” position and the ALARM SWITCH to “RADIO” position.

2.Set the BAND SELECTOR SWITCH to desired AM/FM.

3.Select the desired station with TUNING CONTROL.

4.Adjust the volume level with VOLUME VONTROL.

5.To obtain better FM reception, lay out the FM ANTENNA WIRE to its full extent. NOTE: Do not connect FM antenna to outside antenna.

6.The radio can be switched off by setting FUNCTION SWITCH to the “OFF” position.

HOW TO SET THE CLOCK

1.Press the TIME SET BUTTON simultaneously with HOUR SET BUTTON for hour settings or MINUTE SET BUTTON for minute settings.

TO SET THE ALARM TO WAKE TO RADIO

1.Press the ALARM SET OFF BUTTON simultaneously with HOUR SET BUTTON for hour settings or MINUTE SET BUTTON for minute settings. Slide the BAND SELECTOR SWITCH to AM or FM position. Select a radio station and make sure the volume is set as desired level.

2.Slide the FUNCTION SWITCH to the “AUTO” position. Slide the ALARM SWITCH to the “RADIO/AUX” position. The ALARM RADIO ICON will light indicating the alarm is now activated. When the actual time matches the selected preset alarm time, the radio will automatically turn on for 1 hour and 59 minutes and then shuts off.

TO SET THE ALARM TO WAKE TO BUZZER

1.Press the ALARM SET OFF BUTTON simultaneously with HOUR SET BUTTON for hour settings or MINUTE SET BUTTON for minute settings.

2.Slide the FUNCTION SWITCH to the “AUTO” position. Slide the ALARM SWITCH to the “BUZZER” position. The ALARM BUZZER ICON will light indicating the alarm is now activated. When the actual time matches the

Image 8
Contents Alarm Clock Radio Safety Instructions Page Page NEC National Electrical Code Important Information Required by the FCC Location of Controls Power Connection HOW to SET the ClockTo SET the Alarm to Wake to Radio To SET the Alarm to Wake to BuzzerSwitching OFF the Alarm Sleep Timer OperationSnooze Operation Working with Audio SourceSpecifications LED Night Light Operation