Pelco DX9200HDDI manual Connecting Four Storage Units to ONE Recorder

Page 13

CONNECTING FOUR STORAGE UNITS TO ONE RECORDER

1.Connect a SCSI cable from Host A on Storage A to Channel A on the recorder.

2.Connect a SCSI cable from Host A on Storage B to Channel B on the recorder.

3.Connect a SCSI cable (DX9200HDDI-LCBL) from the Host A Out port on Storage A to the Host A In port on Storage C.

4.Connect a SCSI cable (DX9200HDDI-LCBL) from the Host A Out port on Storage B to the Host A In port on Storage D.

5.Plug the power cords into the units and into a universal power supply (UPS).

6.Turn on the power supplies on the rear of each storage unit. You can turn them on in any sequence.

7.Turn on each storage unitÕs main power.

8.Turn the recorder on.

Figure 8. Four Storage Unit/One Recorder Configuration

C637M-B (10/03)

13

Image 13

Contents DX9200HDDI Series IDE Video Storage Unit Contents Radio and Television Interference Regulatory NoticesImportant Safeguards and Warnings Models DescriptionFront View Shows the features on the front of the IDE storage unitBack View Shows the features on the back of the IDE storage unitInstallation Rack Washers Screws MountingConnecting ONE Storage Unit to TWO Recorders Connecting ONE Storage Unit to ONE RecorderHardware Connections Two Storage Unit/One Recorder Configuration Connecting TWO Storage Units to ONE RecorderThree Storage Unit/One Recorder Configuration Connecting Three Storage Units to ONE RecorderFour Storage Unit/One Recorder Configuration Connecting Four Storage Units to ONE RecorderDefinition OperationTroubleshooting HOW to Replace a FAN ServiceHOW to Replace a Power Supply HOW to Replace a Failed Hard Drive HOW to Change from RAID 5 to RAID 5+1Adding a Hard Drive Warranty and Return Information ISO9001

Related manuals

Manual 56 pages 10.74 Kb