IBM DS3000 manual Recommended RAID Configurations

Page 16

Storage

Controller A

Up to 8

All ports see all MDC and client ports

 

Controller B

Up to 8

All ports see all MDC and client ports

RECOMMENDED RAID CONFIGURATIONS

 

RAID

RAID Array

Segment

Disk type

 

level

size

size

FC or SAS recommended

Journal

1 or 10

As required

256

Meta Data

1 or 10

As required

256

FC or SAS recommended

Journal and Meta Data may reside in separate LUNS carved from the same RAID Array if required in small implementations. However, the ideal condition is separate LUNS tied to separate RAID groups for Journal and Meta Data. If possible, these two LUNS should be on a different storage system than the data LUNS.

StorNext can stripe across multiple LUNS. It is recommended that multiple RAID 1 Groups be used for Journal and Meta Data rather than similarly sized RAID 10s. This allows multiple threads to be talking to disk offering enhanced performance.

Data

5

4+1

256

As required to meet performance

 

 

 

 

criteria

 

5

8+1

128

As required to meet performance

 

 

 

 

criteria

Data – Based upon StorNext file system header block size of 1MB, it is important to keep this in mind when selecting the segment size. RAID Array (also called Group) size and appropriate segment size should result in stripe size of 1MB. This will result in optimizing write throughput speeds. Ex. RAID5 4+1 (4 data) drives x 256K (seg size) = 1 MB Write stripe & RAID5 8+1x128K (seg size) = 1 MB stripe.

Note – this rule does not apply to all deployments and could be dramatically different for oil and gas industry deployments among others. It is very important to understand the I/O block size of the applications sitting atop the StorNext File system.

Data

6

4+2

256

As required to meet performance

 

 

 

 

criteria

 

6

8+2

128

As required to meet performance

 

 

 

 

criteria

Some customer applications may specify SATA drives and/or require additional RAID protection. The DS3000/DS4700/DS5000 storage servers offer additional levels of RAID protection if desired.

Digital Media Storage Solution Installation Guide

16

© Copyright 2010, IBM Corporation. All rights reserved.

 

Image 16
Contents Digital Media Storage Solution Installation Guide Contents Migrating from Xsan MDC to Stornext MDC Introduction Mac, Windows and Linux Client Connectivity Current Solutions Meta Data MDCSolution Component Descriptions SAN Architecture criteriaApple Clients Windows ClientsLinux StorNext Clients and MDCs IBM DS StorageDS5100, DS5300 Page Solutions Apple Hardware Connect OnlyApple Homogenous Shared File Windows ClientAPPLE, WINDOWS, and Stornext Support Matrix Client Solution Restrictions and Recommendations HBAs Connections ZoneRecommended RAID Configurations Solution Installation Page Page Quantum / Apple Joint Product Support Program Quantum / Apple Joint Product Support ProgramMigrating from Xsan MDC to Stornext MDC Atto Technology Inc Atto Technology, Inc Value PropositionAtto Celerity 8Gb Fibre Channel HBAs Appendix a Example Configurations Large Heterogeneous StorNext configurationDS5020 for Journal and Meta Data with FC drives Mid to large -sized MAC HomogenousStorNext configuration Mid-sized MAC HomogenousStorNext configuration Small MAC HomogenousStorNext configuration Mid to large -sized Heterogeneous StorNext configuration Page Additional Reference Links Copyright LicenseTrademarks
Related manuals
Manual 38 pages 50.94 Kb Manual 44 pages 3.74 Kb