Installation, Connecting to Power | Black Box LBMC300-MMSC manual

Chapter 6: Installation

6. Installation

This chapter gives step-by-step installation instructions for the converter.

6.1 Selecting a Site for the Equipment

As with any electric device, you should place the equipment where it will not be subjected to extreme temperatures, humidity, or electromagnetic interference. Specifically, the site you select should meet the following requirements:

•The ambient temperature should be between 32 and 113 degrees Fahrenheit (0 to

45 degrees Celsius).

•The relative humidity should be less than 95 percent, noncondensing.

•Surrounding electrical devices should not exceed the electromagnetic field (RFC) standards for IEC 8013, Level 2 (3V/M) field strength.

•Make sure that the equipment receives adequate ventilation. Do not block the ventilation holes on each side of the equipment.

•The power outlet should be within 6 feet (1.8 m) of the converter.

6.2 Connecting to Power

This Converter is a plug-and-play device.

Connect the supplied AC to DC power adapter to the receptacle on the rear panel of the converter, and then attach the plug into a standard AC outlet.

6.3 Installing in a Chassis

LBMC300-MMST and LBMC300-MMSC fit into any of the expansion slots on the compatible chassis, LB300A-RACK. Follow the steps described below.

First, install the converter onto a carrier supplied with the chassis:

Step 1: Unscrew the carrier from the desired expansion slot on the chassis.

Step 2: Fit the converter onto the carrier.

Step 3: When the converter is completely seated onto the carrier, insert the carrier to the guide rails of the expansion slot.

Step 4: Carefully slide in the carrier until it is fully and firmly fit in the chassis. Fasten the screws onto the carrier.

NOTE: Never insert any converter into the chassis directly without using the supplied carriers. The carriers enable you to place the converters securely and consistently without damaging them.

724-746-5500 blackbox.com

Page 15

10/100BASE-TX to 100BASE-FX Media Converter, LBMC300-MMST, LBMC300-MMSC specifications

The Black Box LBMC300-MMSC and LBMC300-MMST are cutting-edge media converters designed to transform standard 10/100BASE-TX Ethernet signals into 100BASE-FX fiber optic signals, and they offer a range of features suitable for various networking applications. These devices are particularly valuable in environments where the extended distance and interference immunity of fiber optics are necessary, thus enhancing network performance and capacity.

One of the standout features of the LBMC300 series is its ability to support both auto-negotiation and full duplex operation, allowing for seamless integration into existing network infrastructures. This adaptability ensures that the converters can automatically detect the optimal speed and duplex mode, ensuring maximum efficiency and performance across different network setups.

In terms of connectivity, the LBMC300-MMSC model features multimode fiber capabilities, making it ideal for short to medium distance applications. It operates over multimode fiber cables, which can reach distances up to 2 kilometers. On the other hand, the LBMC300-MMST model supports single-mode fiber, significantly extending transmission distances up to 20 kilometers. This versatility allows businesses to choose the appropriate model based on their specific networking needs, whether for local area networks (LANs) or connecting remote locations.

Another noteworthy characteristic is the robust design of these media converters. They are built to withstand adverse environmental conditions, making them suitable for deployment in various settings, including industrial environments. The compact and lightweight design allows for easy installation, whether through rack mounting or standalone placement.

Regarding power options, the LBMC300 series supports both wall-mount and DIN-rail configurations. This adaptability provides flexibility in deployment, allowing IT professionals to choose the best setup for their space and infrastructure needs.

Additionally, these media converters are equipped with LED indicators that provide real-time monitoring of connection status and data transmission. This feature simplifies troubleshooting, enabling network administrators to quickly identify issues and maintain optimal network functionality.

In summary, the Black Box LBMC300-MMSC and LBMC300-MMST media converters are exceptional solutions for businesses seeking to enhance their network capabilities. With features such as auto-negotiation, multimode and single-mode fiber support, sturdy design, and flexible power options, these converters meet the demanding needs of modern networking environments while providing reliable performance for a wide range of applications.