Connections & Setup
Satellite
VCR
SATELLITE RECEIVER | Antenna |
|
|
| |
| 2A |
|
IN FROM ANT |
| CH3 |
|
| |
|
| CH4 |
OUT TO TV | SATELLITE |
|
VIDEO AUDIO | IN |
|
VCR 1B | 3A | 2B |
| ||
|
|
Satellite Signal
|
| IN FROM ANT | |
VIDEO | AUDIO | CH3 | |
CH4 | |||
|
| ||
|
| OUT TO TV |
1A
TV (back panel)
ANT | VIDEO IN AUDIO IN |
3B
Connection: TV + VCR + Satellite Receiver
TV
1.Connect your Satellite Receiver to your TV
A.Connect the white audio cable to the AUDIO IN jack on the back of the TV and to the Audio Output Jack on the satellite receiver. If you have a stereo satellite receiver, use the L/MONO jack on the back of the satellite receiver to make this connection. Let the red audio cable hang.
B.Connect the video cable (yellow) to the VIDEO IN jack on the back of the TV and to the Video Output Jack on the satellite receiver.
2.Connect coaxial cables to the Satellite Receiver
A.Connect the coaxial cable from your cable outlet, cable box, or antenna to the Input Jack on your satellite receiver (sometimes labeled IN FROM ANT).
B.Connect the coaxial cable from your satellite dish antenna to the Input Jack on your satellite receiver (sometimes labeled SATELLITE IN).
3.Connect the Satellite Receiver to the VCR and to the TV
A.Connect a coaxial cable to the Output Jack (sometimes labeled OUT TO TV) on the satellite receiver and to the Input Jack on the VCR (sometimes labeled IN FROM ANT).
B.Connect a coaxial cable to the Output Jack on the VCR (sometimes labeled OUT TO TV) and to the ANT. jack on the TV.
Go to page 10
8 | Chapter 1 |