HANNspree ST40-12A1 manual Add Channel, Channel Add/Erase

Channel Add/Erase

TV MENU
TV/CATV		CATV
CH ADD/ERASE
AUTO	PROGRAM
SEL	ENTER	MENU

TV 43 CH UP/DOWN -ERASE ADD+

MENU

1Press the CH DOWN button to select CH ADD/ERASE.

2Press the VOL UP button. The OSD menu display switches to the following screen.

Press the CH UP/ CH DOWN button on the front panel to select a channel.

Add Channel

Then press the VOL UP on the front panel button to add the selected channel. The channel number changes from yellow into green after adding the channel.

Erase Channel

Then press the VOL DOWN button on the front panel to erase the selected channel. The channel number changes from green into yellow after erasing the channel.

Note

You can still access the erased channel by entering the channel number using the number buttons on the remote control. Add the channel again if it was erased accidentally.

46