TV ANTENNA
Indoor Antenna Hookup
Your TV has a rod antenna.
1. Extend the antenna and rotate it until you get the best TV picture.
VHF/UHF Outdoor Antenna Hookup
*Shorten the rod antenna, then lower the rod antenna into place on top of the TV.
1.If the outdoor antenna has flat twin lead (300 ohm) wire, connect the ends of this wire to the two screws on the adaptor (supplied). Push the plug of this adaptor into the TV external antenna (EXT. ANT.) jack.
2.If the outdoor antenna has two twin lead wires or one round (co- axial) cable, purchase an appropriate adaptor from your dealer. Connect the antenna wires and/or cable to the adaptor, then plug the adaptor into the TV external antenna (EXT. ANT.) jack.
UHF/VHF
Antenna
EXT.ANT. TINT COLOR
300 ohm
Flat Twin
Leads
Adaptor (supplied) Part # 4835 142 17005
or
75 ohm to 300 ohm Adaptor (optional)
75ohm Coaxial Cable
To order any optional accessories call Philips Service Solutions Group at
– 3 –