Philips 25TS56C1 manual Safety Instructions Read before operating equipment

Page 3

SAFETY INSTRUCTIONS - Read before operating equipment

This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation pre- cautions which you should be particularly aware of.

1.Read Instructions - All the safety and operating instructions should be read before the appliance is operated.

2.Retain Instructions - The safety and operating instructions should be retained for future reference.

3.Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to.

4.Follow Instructions - All operating and use instructions should be followed.

5.Water and Moisture - The appliance should not be used near water - for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool, etc.

6.Carts and Stands - The appliance should be used only with a cart or stand that is recommended by the manufacturer.

6A.An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven sur- faces may cause the appliance and cart combination to

overturn.

6B. Tilt/Stability - All televisions must comply with recommended inter- national global safety standards for tilt and stability properties of its cabinet design.

Do not compromise these design standards by applying exces- sive pull force to the front, or top, of the cabinet which could ultimately overturn the product.

Also, do not endanger yourself, or children, by placing elec- tronic equipment/toys on the top of the cabinet. Such items could unsuspectingly fall from the top of the set and cause product damage and/or personal injury.

7.Wall or Ceiling Mounting - The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer.

8.Ventilation - The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or, placed in a built- in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

9.Heat - The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (includ- ing amplifiers) that produce heat.

10.Power Sources - The appliance should be connected to a power sup- ply only of the type described in the operating instructions or as marked on the appliance.

11.Power-Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords and plugs, convenience receptacles, and the point where they exit from the appliance.

12.Cleaning - The appliance should be cleaned only as recommended by the manufacturer.

13.Power Lines - An outdoor antenna should be located away from power lines.

14.Outdoor Antenna Grounding - If an outside antenna is connected to the receiver, be sure the antenna system is grounded so as to pro- vide some protection against voltage surges and built up static charges.

Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984, provides information with respect to proper grounding of the mats and supporting structure grounding of the lead-in wire to an anten- na discharge unit, size of grounding connectors, location of antenna- discharge unit, connection to grounding electrodes and require- ments for the grounding electrode. See Fig. below.

15.Non-use Periods - The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time.

16.Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.

17.Damage Requiring Service - The appliance should be serviced by qualified service personnel when:

A.The power supply cord or the plug has been damaged; or

B.Objects have fallen, or liquid has been spilled into the appliance; or

C.The appliance has been exposed to rain; or

D.The appliance does not appear to operate normally or exhibits a marked change in performance; or

E.The appliance has been dropped, or the enclosure damaged.

18.Servicing - The user should not attempt to service the appliance beyond that described in the operating instructions. All other servic- ing should be referred to qualified service personnel.

Note to the CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that pro- vides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

Example of Antenna Grounding

GROUNDING AS PER NATIONAL ELECTRICAL CODE (NEC)

as per NEC - National Electric Code

GROUND CLAMP

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

L CTRIC S RVIC QUIPM NT

POWER SERVICE GROUNDING ELECTRODE SYSTEM

 

Image 3
Contents Cover L9 25TS56C1 Warranty Verification Safety Instructions Read before operating equipment Table of Contents Hooking UP Your TV Basic Cable TV Connections Push the round end Hooking UP Your TV Basic Antenna TV ConnectionsIf your antenna has a round If your antenna has flat twin-leadConnect your Antenna or Cable TV signal to the in from Hooking UP Your TV Basic TV to VCR ConnectionsConnect the OUT to TV plug on the VCR to the 75Ω plug on Remote Basic TV/REMOTE Operations TelevisionTV Remote Buttons Press the Cursor Right Button repeatedly to select ENG Using the Language ControlPress the Cursor Right button to display the Setup menu Press Cursor UP or Down buttons to scrollUsing the Tuner Control Press the Cursor Right Using the Auto Program ControlBered or the CH + or buttons HOW to ADD and Delete ChannelsScroll down using the CUR- SOR UP or Down buttons Press the Cursor UP or Down buttons to scrollVCD, VCR, LD, or SAT Using the External ControlHOW to Adjust the TV Picture Press the Menu button onPress the Cursor UP or Down buttons until Activating the Contrast Plus Black Stretch Control Press the Cursor Right or Cursor Left buttons to Activating the Noise Reduction Picture ControlActivating the TV’S on Timer Control Setting the TV’S ClockSetting the TV’S Start UP Time Activating the Start UP ChannelPress the Clock button to Press the Cursor UP or Cursor Down button until Using the Closed Caption Control240 MIN Using the Sleep Timer ControlPress the Menu button to dis Using the TV Volume BAR ControlMovie Ratings Understanding the Smartlock C OntrolUsing the Numbered but- tons, enter 0, 7, 1, 1 Understanding the Smartlock C Ontrol Access CodeClear ALL Understanding the Smartlock C Ontrol Block ChannelUnderstanding the Smartlock C Ontrol Blocking Options Using the Numbered butUse the Cursor Right or Cursor Left buttons on Understanding the Smartlock Control Movie RatingsUnderstanding the Smartlock C Ontrol Parental Guideline Understanding the Smartlock C Ontrol Review Screen Block Unrated Block no RatingSetting the Bass and Treble Boost Controls HOW to SET the TV for Stereo Programs Press the Cursor UP or Cursor Down buttons HOW to USE the Input Control A/V InputsConnect the Video yellow Turn the VCR and the TV onUsing the Smart Picture C Ontrol Press the Smart Sound but Using the Smartsound C OntrolPress the Channel + or Using the TV’S Smartsurf C OntrolTips if Something Isnt Working TV Displays Wrong Channel or No Channels AboveIndex Glossary to Television TermsPhilips Consumer Electronics Company Texas Limited Warranty