Choose Your Menu Style, Set Recording Parameters

Choose Your Menu Style

7.Select a category of menu styles from the Category drop-down list.

8.Scroll through the list, click the style to use for your menus, and click the Next button.

Set Recording Parameters

9.Select your record settings from Record drop- down list.

10.Select the quality for your recordings from the Set Quality drop-down list. Refer to the table below for more information on video quality settings and record time.

Make the Recording

Click to select style

Scroll to desired style

Select to
give menu	Choose what you
buttons	Choose what you
and text a	want to record
3-D effect

You can use the VCR playback control buttons to locate the video you want to record on the DVD.

11.Click the Record button to begin recording.

12.Click the Stop button to finish recording. A message displays on the screen to indicate the process is complete.

Choose the video

quality Rewind

Play

Stop

Move	Move	Add
back one	forward	chapter
Fast frame	one	points
forward	frame	automati-
forward		cally
		cally

	You can fit this amount of video on the disc...

If you select a video	DVD (4.7 GB)	CD (700 MB)	CD (650 MB)
quality setting of…

Best	60 minutes	9 minutes	8 minutes

Better	120 minutes	18 minutes	16 minutes

Good	180 minutes	27 minutes	24 minutes

Note: A typical Direct-to-DVD project using a 60 minute tape will take 60 minutes to capture and an additional 60 minutes to author to DVD. Project times may vary if you perform editing.