RCA RP 3757 user manual Display, Inserting Battery into the Remote Control

THE DIGITAL CD CLOCK RADIO

THE DIGITAL CD CLOCK RADIO

Protection against main power failures:

1. Remove battery compartment door (located on the bottom of the radio) by

applying thumb pressure to area indicated on battery door and then lift the door

REMOTE CONTROL

EN

Turns the unit off

out and off the cabinet.
2.	Connect a 9-volt battery connector plug. (6LR61 or NEDA 1604A)
3.	Insert battery in the compartment and replace the compartment door.

NOTE: Alkaline (6LR61/NEDA 1604A) batteries are recommended. Carbon-zinc battery may be used but memory holding time will be substantially reduced. Memory holding time for a fresh alkaline battery is approximately 8 hours (if radio or alarm are not operated) which should take care of short, nuisance-type AC power failures. To preserve battery life, the unit should remain plugged into an AC outlet. As the battery gets older, its voltage drops and memory may be lost. Be sure to replace the battery periodically. Battery should be removed if the unit will be stored for more than one month. Leaky battery can badly damage the clock radio.

The Display

Mutes volume

Starts and pauses disc playback

Tunes down in radio frequency; Skips to previous tracks or settings

Stops playback

To enable Snooze and disable Sleep function

REMOTE CONTROL		OFF
ECA		ADI	O
R	LL	R

MEMO ON

BAND

TRACKTRACK

TUNETUNE

VOLUME

SNOOZE SLEEP

To view or recall programme memory

Turns on the radio; selects AM/FM band

Tunes up in radio frequency; Skips to the next track or settings

Adjusts volume

To enable Sleep function

		Wake
		to Radio			Wake		Random
	Wake				to CD		playback
					Clock Setting
	to Tone
Wake 1	WAKE 1	1	1	1	ALL	TIMER	TRACK	Track number and
Wake 2	WAKE 2	2	2	2	CDFM	AM	radio preset number
							MEMO	Function
	AM							indicator
AM/PM							STEREO
								Memory
indicator	PM						MHz
							KHz	Stereo
	Repeat All							Radio frequency
	indicator							scale
					Countdown/Nap/
					Timer indicator

Inserting Battery into the Remote Control:

Slide open the battery compartment door on the back of the remote control and insert a “CR2430” button cell battery with polarities matching with indications.

Caution:

Danger of explosion if battery is inserted incorrectly.

Replace only with the same or equivalent battery type.

Caution:

The remote consists of a magnet which may interfere with operations of other electronic appliances. Avoid placing the remote on any hot metal surfaces! eg. microwave oven, television, cooking stove, etc.

1 2