RCA user manual RP5605 RP5605R, FCC Information Before you begin, General controls, Clock

v6.0 (1.0.6.0) (EN/F)

IMPORTANT SAFETY INSTRUCTIONS

user manual guide de l’utilisateur

RP5605

RP5605R

EN/F

It is important to read this user manual prior to using your new product for the first time. Nous vous recommandons de lire ce manuel d’instructions avant d’utiliser votre nouveau produit pour la première fois.

Some of the following information may not apply to your particular product; however, as with any electronic product, precautions should be observed during handling and use.

•Read these instructions.

•Keep these instructions.

•Heed all warnings.

•Follow all instructions.

•Do not use this apparatus near water.

•Clean only with dry cloth.

•Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

•Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

			PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE
• Do not defeat the safety purpose			lightning storms or when unused	product.
	of the polarized or grounding-		for long periods of time.	• Care should be taken so that
	type plug. A polarized plug		• Refer all servicing to qualified	objects do not fall into the
	has two blades with one wider		service personnel. Servicing is	product.
	than the other. A grounding		required when the apparatus	• Do not attempt to disassemble
	type plug has two blades and		has been damaged in any way,	the cabinet. This product does
	a third grounding prong. The		such as power-supply cord or	not contain customer serviceable
	wide blade or the third prong is		plug is damaged, liquid has been	components.
	provided for your safety. If the		spilled or objects have fallen into	• The marking information
	provided plug does not fit into		the apparatus, the apparatus	is located at the bottom of
	your outlet, consult an electrician		has been exposed to rain or	apparatus.
	for replacement of the obsolete		moisture, does not operate	• To be completely disconnect the
	outlet.		normally, or has been dropped.	power input, the main plug of
• Protect the power cord from			ADDITIONAL SAFETY	apparatus shall be disconnected
	being walked on or pinched			from the mains.
	particularly at plugs, convenience		INFORMATION	• Main plug is a disconnect device.
	receptacles, and the point where		• Apparatus shall not be exposed	The main plug should not be
	they exit from the apparatus.		to dripping or splashing and no	obstructed OR should be easily
•	Only use attachments/accessories		objects filled with liquids, such	accessed during intended use.
	specified by the manufacturer.		as vases, shall be placed on the	• The ventilation should not
•	Use only		apparatus.	be impeded by covering the
	with the	]	• Always leave sufficient space	ventilation openings with items
	cart, stand,		around the product for	such as newspaper, table-cloths,
	tripod,		ventilation. Do not place	curtains etc.
	bracket,		product in or on a bed, rug, in	• No naked flame sources such as
	or table	Portable Cart Warning	a bookcase or cabinet that may	lighted candled should be placed
	specified by		prevent air flow through vent	on the apparatus.
	the manufacturer, or sold with		openings.	• Attention should be drawn to
	the apparatus. When a cart is		• Do not place lighted candles,	the environmental aspects of
	used, use caution when moving		cigarettes, cigars, etc. on the	battery disposal.
	the cart/apparatus combination		product.	• The use of apparatus in
	to avoid injury from tip-over.		• Connect power cord only to AC	moderate climates.
• Unplug this apparatus during			power source as marked on the

This equipment is a Class

IIor double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.

Plugging in for power

AC OUTLET POWER SUPPLY: 120 V~60 Hz

The AC power plug

is polarized (one

blade is wider than

the other) and only

fits into AC power outlets one way. If the plug will

not go into the outlet completely, turn the plug over and try to insert it the other way. If it still does not fit, contact a qualified electrician to change the outlet, or use a different one. Do not attempt to bypass this safety feature.

Important battery precautions

•Any battery may present a risk of fire, explosion, or chemical burn if abused. Do not try to charge a battery that is not intended to be recharged, do not incinerate, and do not puncture.

•Non-rechargeable batteries, such as alkaline batteries, may leak if left in your product for a long period of time. Remove the batteries from the product if you are not going to use it for a month or more.

•If your product uses more than one battery, do not mix types and make sure they are inserted correctly. Mixing types or inserting incorrectly may cause them to leak.

•Discard any leaky or deformed battery immediately. They may cause skin burns or other personal injury.

•Please help to protect the environment by recycling or disposing of batteries according to federal, state, and local regulations.

FCC Information Before you begin

WARNING: The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like.

Ecology

Help protect the environment - we recommend that you dispose of used batteries by putting them into specially designed receptacles.

For your records

In the event that service should be required, you may need the model number and the serial number. In the space below, record the date and place of purchase and the serial number:

Model No.:

Date of Purchase:

Place of Purchase: Serial No.:

Service information

This product should be serviced only by those specially trained in appropriate servicing techniques. For instructions on how to obtain service, refer to the warranty included in this user manual.

Technical information

Product: CD/Clock Radio

Brand: RCA

Model: RP5605, RP5605R

Power Supply: 120V ~ 60Hz

Power Consumption: 13 Watts

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by Audiovox could void the user’s authority to operate the equipment.

Battery back-up operation

The power failure protection circuit will not operate unless battery is installed.

No worry battery backup

When the battery backup functions, the digital display will not light, however, the wake function still occurs during the power interruption if remaining battery power is adequate.

Normal operation will resume after AC power is restored so you will not have to reset the time or wake.

Install battery as follow:

1.Remove battery compartment door (located at the bottom of the radio) by applying thumb pressure to the tab on battery door and then lift the door out and off the cabinet.

2.Connect a 9-volt battery (not supplied) to the connector plug.

3.Replace the compartment door.

Power failure indicator

When AC power is interrupted (disconnected) for a short period of time, both time and alarm settings will change (unless battery is installed). After AC power is restored (reconnected), the Digital Display will blink to indicate that power was interrupted and you should readjust the time and alarm settings.

Alkaline (NEDA 1604A/ IEC 6LR61) battery is recommended. Carbon-

zinc battery may be used but memory holding time will be substantially reduced. Memory holding time for a fresh alkaline battery is approximately 8 hours (if radio or alarm are not operated) which should take care of short, nuisance-type AC power failures. To preserve battery life, the unit should remain plugged into an AC outlet. As the battery gets older, its voltage drops and memory may be lost. Be sure to replace the battery periodically. Battery should be removed if the unit will be stored for more than one month. Leaky battery can badly damage the clock radio.

General controls

Top view

– stops CD playback Right view

– turns on the unit from CD mode; pauses or resumes CD playback

SLEEP – activates the Sleep function

TUNING – selects radio frequency

BAND AM/FM – selects radio band

Clock

Setting clock

1.Press CLOCK SET once. The current clock time flashes on the display.

3.When finished, wait for about 5 seconds or press CLOCK SET to exit clock setting mode.

Radio

Switching on

Press RADIO ON to turn on the radio.

Switching band

Slide the BAND/AM•FM switch on the right of the unit to select AM or

FM Antenna – The power cord acts as your FM antenna. The power cord picks up moderate to strong stations and eliminates the need for an external antenna in most strong signal areas. Be sure the power cord is stretched out to its full length. Do

RADIO ON – turns on the radio; selects the radio from other modes

OFF – turns off the unit; turns off the wake function and sleep mode

/ – sets clock or wake time; skips to previous or next CD track during CD playback

CLOCK SET – activates clock time setting mode

WAKE TIME – activates wake time setting mode; checks current wake time

WAKE MODE – activates wake function and changes wake mode

SNOOZE – turns off the wake function temporarily; cancels the sleep function

Left view

+VOLUME – – adjusts volume

2.Press or to set the clock time. The time decrements or increments will follow by a faster rate when you press and hold the buttons. AM or PM indicator also lights beside the time on the display.

FM band.

Tuning radio

Rotate the TUNING dial on the right of the unit to select radio frequency.

Antennas

AM Antenna – A built-in ferrite rod antenna eliminates the need for an outside antenna for AM reception. Rotating the unit slightly may improve reception of distant AM stations.

not coil or bunch the cord together. Changing position of the power cord may improve reception.

Built-In AFC – The Built In Automatic Frequency Control (AFC) works only on FM. It helps reducing drift on FM reception and keeping the radio locked in on the FM station to which it is tuned.

When tuning in FM stations, you may notice that the station you are tuning can be well-tuned on two or three nearby points on the dial. Always tune carefully at the loudest and clearest point.

CD player

Wake function

Sleep function

Listening to CD

1.Lift open the CD compartment door.

2.Insert a disc and close the door.

3.Press to select CD mode and start CD playback.

• Press to pause playback and press again to resume.

4.Adjust volume to your desired level.

5.Press or to skip backward or forward a track. Press and hold to search through a track.

6.Press to stop playback.

7.Press RADIO ON to listen to the radio or OFF to turn off the unit.

Warranty information

Warranty information

12 Month Limited Warranty Applies to RCA Audio/Video Products

• AUDIOVOX ELECTRONICS CORP.

(the Company) warrants to the

original retail purchaser of this

product that should this product

or any part thereof, under

normal use and conditions, be

proven defective in material or

workmanship within 12 months

from the date of original

purchase, such defect(s) will

be repaired or replaced with

reconditioned product (at the

Company’s option) without

charge for parts and repair labor.

• To obtain repair or replacement

• If disc is paused for more than 5 minutes, the CD player will resume to stop mode automatically.

•If disc is stopped in the CD mode for more than 30 minutes without further operations, the unit will turn off automatically.

incurred for installation, removal or reinstallation of product, to corruptions caused by computer viruses, spyware or other malware, to loss of media, files, data or content, or to damage to tapes, discs, removable memory devices or cards, speakers, accessories, computers, computer peripherals, other media players, home networks or vehicle electrical systems.

• This Warranty does not

apply to any product or

part thereof which, in the

opinion of the Company, has

suffered or been damaged

through alteration, improper

installation, mishandling,

Setting wake time

1.Press WAKE TIME once. The current wake time flashes on the display.

2.Press or to set the wake time. The time decrements or increments will follow by a faster rate when you press and hold the buttons. AM or PM indicator also lights beside the time on the display.

3.When finished, wait for about 5 seconds or press WAKE TIME to exit wake time setting mode.

•The Wake to Alarm mode (read below) will be automatically activated whenever the wake time has been set.

or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 24 MONTHS FROM DATE OF ORIGINAL PURCHASE.

IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY.

Selecting wake source

1.If your desired wake source is radio or CD:

•Wake to Radio – select an AM or FM station (refer to “Radio”).

•Wake to CD – insert a CD in the CD compartment.

2.Set a wake time (refer to “Setting wake time”).

3.Press WAKE MODE repeatedly to select a wake source. The indicator lights against the wake source icons on the right of the display to indicate the currently selected wake source:

wake by alarm

wake by radio wake by CD

•Once the wake source is selected, the wake function will be activated at the set wake time.

Checking wake time

Press WAKE TIME to show the current wake time which flashes briefly on the display.

also have other rights which vary from state to state.

How to make a warranty claim:

• If your product is capable of

storing content (such as an mp3

player, digital voice recorder,

etc), it is recommended to

make periodic backup copies of

content stored on the product.

If applicable, before shipping a

product, make a back up copy

of content or data stored on

the device. Also, it is advisable

to remove any personal

content which you would not

want exposed to others. IT IS

LIKELY THAT CONTENTS AND

DATA ON THE DEVICE WILL BE

Turning off the wake function

Silence the wake function momentarily:

•With SmartSnooze™, press SNOOZE, , , or to turn off the wake function temporarily for extra sleep time.

•The wake function will activate again when the snooze period (9 minutes) is over.

•The snooze period is fixed and cannot be changed.

be responsible to restore any personal preference settings.

• Properly pack your unit. Include

any remotes, memory cards,

cables, etc. which were originally

provided with the product.

However DO NOT return any

removable batteries, even if

batteries were included with

the original purchase. We

recommend using the original

carton and packing materials.

• Include evidence of purchase

date such as the bill of sale. Also

print your name and address and

a description of the defect. Send

via standard UPS or its equivalent

to:

Stop the wake function:

Press OFF. The wake function will activate again on the following day at the same time.

Cancel the wake function completely:

Press WAKE MODE repeatedly until no indicator lights against the wake source icons. The set wake time will not be erased and can be used the next time when you switch on wake function again.

•A new or refurbished unit will be shipped to you freight prepaid.

What we will do:

Provide you with a new, or at our option, a refurbished unit. The exchange unit is under warranty for the remainder of the original product’s warranty period.

For Canada Customers, please ship to:

Audiovox Return Centre c/o Genco

6685 Kennedy Road, Unit#3, Door 16, Mississuaga, Ontario L5T 3A5

You can set the duration (up to 90 min) before the radio or CD player turns off automatically.

1.Press SLEEP repeatedly to select a duration (90, 80, 70, 60, 50,

40, 30, 20, 10min or OFF) before the radio or CD player turns off automatically.

•The default sleep time is 60 minutes.

•By default, the radio will be switched on once SLEEP is pressed. You may change to listen to the CD player by

pressing if a disc is loaded.

2.To check the remaining duration before the unit turns off, press SLEEP once.

3.To cancel the sleep function, press SNOOZE or OFF.

If you set Sleep function with low volume level before going to bed, we

advise using Wake to Alarm mode.

Illustrations contained within this publication are for representation only and subject to change.

The descriptions and characteristics given in this document are given as a general indication and not as a guarantee. In order to provide the highest quality product possible, we reserve the right to make any improvement or modification without prior notice.

within the terms of this

Warranty, the product is to be

delivered with proof of warranty

coverage (e.g. dated bill of

sale), specification of defect(s),

transportation prepaid, to the

Company at the address shown

below.

• This Warranty does not extend

to the elimination of externally

generated static or noise, to

correction of antenna problems,

loss/interruptions of broadcast

or internet service, to costs

misuse, neglect, accident, or by

removal or defacement of the

factory serial number/bar code

label(s). THE EXTENT OF THE

COMPANY’S LIABILITY UNDER

THIS WARRANTY IS LIMITED TO

THE REPAIR OR REPLACEMENT

PROVIDED ABOVE AND, IN NO

EVENT, SHALL THE COMPANY’S

LIABILITY EXCEED THE PURCHASE

PRICE PAID BY PURCHASER FOR

THE PRODUCT.

• This Warranty is in lieu of

all other express warranties

No person or representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product.

•Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights and you may

LOST DURING SERVICE AND

REFORMATTING. AUDIOVOX

ACCEPTS NO LIABILITY FOR LOST

CONTENT OR DATA, OR FOR THE

SECURITY OF ANY PERSONAL

CONTENT OR DATA ON THE

RETURNED DEVICE. Product will

be returned with factory default

settings, and without any pre-

loaded content which may have

been installed in the originally

purchased products. Consumer

will be responsible for reloading

data and content. Consumer will

Audiovox Electronics Corp.

Attn: Service Department.

150 Marcus Blvd.

Hauppauge N.Y. 11788

1-877-833-3491

• Insure your shipment for loss or

damage. Audiovox accepts no

liability in case of damage or loss

en route to Audiovox.

• Pay any charges billed to you by

the Exchange Center for service

not covered by the warranty.

Visit http://store.audiovox.com to find the best accessories for your products.

©2010 Audiovox Accessories Corporation

111 Congressional Blvd., Suite 350 Carmel, IN 46032 Trademark(s) ® Registered

Printed in China