3.Push down the speaker’s red tab to open the positive (+) terminal and insert the wire’s other conductor. Release the tab.
4.Using the speaker wire’s coding as a guide, connect the other end of the speaker wire to the amplifier’s corresponding (right or left) speaker terminals.
MAINTENANCE
To enjoy your
•Keep the speaker dry. If it gets wet, wipe it dry immediately.
•Use and store the speaker only in normal temperature environments.
•Handle the speaker gently and carefully. Don’t drop it.
•Keep the speaker away from dust and dirt.
•Wipe the speaker with a damp cloth occasionally to keep it looking new.
Modifying or tampering with the speaker’s internal components can cause a malfunction and might invalidate its warranty. This receiver has been manufactured to the specifications of RadioShack and is covered by a limited warranty from RadioShack. If your receiver is not operating as it should, take it to your local RadioShack store or call
SPECIFICATIONS
Frequency Response: | ........... |
Power Handling | 70 Watts (RMS) |
Maximum Power | 140 Watts |
Impedance | 8 Ohms (Nominal) |
Speaker Complement:
Woofer and
Range,
Soft Dome Tweeter
Dimensions (HWD):
89/16 × 51/2 × 47/8 Inches
(22 ×14 × 12.4 cm)
Weight | 5 lb 12 oz |
| (2.32 kg) |
Specifications are typical; individual units might vary. Specifications are subject to change and improvement without notice.
3