Connecting to the computer

Player

USB port of your computer

•Rotate the USB plug out of the player body and connect the player to your PC as shown.

•The player will turn on automatically and display "USB connected" on the display. The player will appear as a drive letter on your computer, a Mass Storage Class (MSC) device, and behave as a detachable drive for file transfer in one or both directions.

•The RCA easyRipTM Media Software installer is stored on the player. Go to MyComputer in the Start menu, find and open the drive letter associated with the player (i.e. RCA MP3) and then double-click the rcaeasyrip_setup.exe file to launch the installer.

•The software installer can be deleted from the player after installation to free up more storage space*.

• It may take several seconds for the player to be detected. Click View -> Refresh in My Computer or Windows Explorer to make sure the player has been detected.

•The player is capable of transferring files at USB 2.0. If a USB 2.0 port is available on your

computer, use it to connect to your player. The player is still backward compatible with the older USB 1.1 ports; however, you will not be able to take full advantage of the potential speed increase.

•IMPORTANT: Do not disconnect the USB cable from either the PC or the player during the software installation.

* The latest software can be downloaded from www.rcaaudiovideo.com.