RD1028 EN 6/18/04 10:18 AM Page 26
Digital Music Operation
Digital Music Operation
EN Programming Tracks
1.In stop mode, press and hold MODE for 2 seconds to enter program mode. The program mode icon 
P 
lights on the display.
-- P 0 1 S o n g I n f o
The flashing ‘ -
2. Press SKIP BACKWARD ( ) or SKIP FORWARD ( ) to select a track. The selected track number flashes on the display.
Note
The player enters Intro Play mode and plays the beginning of each track as you scroll through tracks for programming.
3.Press MODE to confirm track selection.
4.Press MODE again to skip to the next programming position.
5.Repeat steps
Tip
20 program locations are available on this unit.
6.Press OFF / STOP ( 
) to exit programming mode.
The unit returns to stop mode automatically after 30 seconds if there is no key activation.
See “Play Modes” section for more information on program playback.
Editing program
Overwriting Programmed Tracks
1.In stop mode, press and hold MODE to enter program mode.
2.Press MODE repeatedly to select the program location you want to overwrite.
3.Press SKIP BACKWARD ( 
) or
SKIP FORWARD ( 
) to select the new track you want to store in the selected program location.
4.Press MODE to confirm selection.
5.Repeat steps 2 and 3 to overwrite additional programmed tracks.
Deleting Programmed Tracks | EN |
1.In stop mode, press and hold MODE to enter program mode.
2.Press MODE to select the programmed location and track to be deleted.
3.Press and hold DSP for about 3 seconds to delete the unwanted track from your program list.
‘ - - ‘ shows on display to indicate successful deletion.
4.Repeat steps 2 and 3 to delete additional tracks from the program list.
5.To cancel editing program, press OFF /
STOP ( 
) once.
The unit will return to stop mode automatically after 30 seconds if there is no key activation.
15 |
|
|
| 16 |