Before you begin
Installing the battery in the player
1.Apply thumb pressure to slide the battery compartment cover in the direction of the arrow, then remove the cover.
2.Insert the supplied AAA battery, following the polarity marks in the battery compartment.
3.Replace the cover.
•Refer to the battery level icon on the display to check the battery level. Replace the battery when the icon is empty.
Connecting to the computer
USB port of your
computerPlayer
•Rotate the USB plug out of the player body and connect the player to your PC as shown.
•The player will turn on automatically and display "USB connected" on the display. The player will appear as a drive letter on your computer, a Mass Storage Class (MSC) device, and behave as a detachable drive for file transfer in one or both directions.
•The RCA EasyRip™ Media Software installer (stored in the player*) will launch automatically. Click NEXT to begin the installation and follow the instructions to install the software on your PC.
•The software installer can be deleted from the player after installation to free up more storage spaces.
• It might take several seconds for the player to be detected. Click Refresh in My Computer or Windows Explorer
to make sure the player has been detected.
•The player is capable of transferring files at USB 2.0. If USB 2.0 port is available on your computer, use it to connect to your player.
The player is still backward compatible with the older USB 1.1 ports. However, you will not be able to take full advantage of the potential speed increase.
•IMPORTANT: Don’t disconnect the USB cable to the PC or the player during the software installation.
•If the installer does not
* The latest software can be downloaded from www.rcaaudiovideo.com.
9