EN Important Battery Information, Headset Safety

Before You Begin

EN Important Battery

Information

•When storing the unit , be sure to remove the batteries because they may leak and damage the unit.

•Batteries may leak electrolyte if inserted incorrectly, if disposed of in fire, or if an attempt is made to charge a battery not intended to be recharged.

•Never mix new batteries with old ones. Do not mix battery types.

•Discard leaky batteries immediately. Leaking batteries may cause skin burns or other personal injury.

•Do not charge batteries which are not intended to be recharged.

•Dispose of batteries, according to federal, state and local regulations.

Please Respect the

Environment!

Before throwing any batteries away, consult your distributor who may be able to take them back for specific recycling.

Headset Safety

Have a Blast- Just Not in Your Eardrums Make sure you turn down

the volume on the unit

before you put on

headphones. Increase the volume to the desired level only after headphone are in place.

•Do not play your headset at a high volume. Hearing experts warn against extended high-volume play.

•If you experience a ringing in your ears, reduce volume or discontinue use.

•You should use extreme caution or temporarily discontinue use in potentially hazardous situations. Even if your headset is an open-air type designed to let you hear outside sounds, don’t turn up the volume so high that you are unable to hear what is around you.

Insert battery into the player

1.To remove the battery door, gently press on the battery compartment and slide it in the direction of the engraved arrow.

2.Lift up the battery compartment.

3.Insert a “AAA”(UM4) battery with polarities corresponding to the indications on the compartment.

4.Place the battery compartment to the original position.

Note

Refer to the power level indicator on display for battery level.

Replace with new batteries when the indicator is empty. Refer to “Display Overview” on page 11.