| TABLE OF CONTENTS |
DECLARATION OF CONFORMITY | 2 |
SAFETY SYMBOLS | 4 |
SAFETY PRECAUTIONS | 5 |
TOOL STICKERS & TAGS | 6 |
HOSE TYPES | 7 |
HOSE RECOMMENDATIONS | 8 |
HTMA REQUIREMENTS | 9 |
OPERATION | 10 |
TOOL PROTECTION & CARE | 13 |
TROUBLESHOOTING | 14 |
ACCESSORIES | 15 |
SPECIFICATIONS | 15 |
FG10 & PG05 PARTS ILLUSTRATION | 16 |
FG10 & PG05 PARTS ILLUSTRATION | 17 |
FG10 PARTS LIST | 18 |
PG05 PARTS LIST | 20 |
SPARK GUARD & INNER GUARD | 22 |
IMPORTANT
To fill out a Product Warranty Recording form, and for information on your warranty,
visit Stanleyhydraulic.com and select the Warranty tab.
(NOTE: The warranty recording form must be submitted to validate the warranty).
SERVICING THE STANLEY HYDRAULIC FROG GRINDER/PROFILE GRINDER. This manual contains safety, operation, and routine maintenance instructions. Stanley Hydraulic Tools recommends that servicing of hydraulic tools, other than routine maintenance, must be performed by an authorized and certified dealer. Please read the following warning.
WARNING
SERIOUS INJURY OR DEATH COULD RESULT FROM THE IMPROPER REPAIR OR SERVICE OF THIS
TOOL.
REPAIRS AND / OR SERVICE TO THIS TOOL MUST ONLY BE DONE BY AN AUTHORIZED AND
CERTIFIED DEALER.
For the nearest authorized and certified dealer, call Stanley Hydraulic Tools at the number listed on the back of this manual and ask for a Customer Service Representative.
FG10 Service Manual ◄ 3