Accessories, Specifications | Stanley Black & Decker PG10 manual

	SPECIFICATIONS
Wheel Capacity	6 in. dia. ⋅ 3 in. thk ⋅ 5/8-11 threaded arbor (Type 6) U.S.A.
Pressure Range		1000–2000 psi/70–140 bar
Maximum Back Pressure			250 psi/17 bar
Flow Range		HTMA Type RR, 7–10 gpm/26–38 lpm
Porting			-8 SAE O-ring
Couplers		HTMA Flush Face Type Male & Female
Connect Size and Type		3/8 in. Male Pipe Adapter
Hose Whips			No
Weight (with couplers)			118 lb/53.5 kg
Overall Length		44 inches/111.76 cm
Overall Width		20 inches/50.8 cm
Overall Height		30.5 inches/77.4 cm
RPM			4000
Hyrevz™ Motor			24251
Maximum Fluid Temperature			140 °F/60 °C
Sound Power Level			102 dBA
Sound Pressure Level (1m)			93dBA
Vibration Level			3.4m/sec2
	SOUND AND VIBRATION DECLARATION
Test conducted on PG10110 S/N 206 operated at standard 10 gpm input
Measured A-weighted sound power level, Lwa (ref. 1pW) in decibels			102.00 dBA
Uncertainty, Kwa, in decibels			3 dBA
Measured A-weighted sound pressure level, Lpa (ref. 20 µPa) at operator’s position, in decibels			93 dBA
Uncertainty, Kpa, in decibels			3 dBA
Values determined according to noise test code given in ISO 15744, using the basic standard
ISO 3744
NOTE: The sum of a measured noise emission value and its associated uncertainty represents
an upper boundary of the range of values which is likely to occur in measurements.
Declared vibration emission value in accordance with EN 12096
Measured vibration emission value: a			3.4 m/sec²
Uncertainty: K			1.0 m/sec²
Values determined according to ISO 8662-4, ISO 5349-1,2
ACCESSORIES
6 ⋅ 3 ⋅ 5/8-11 Thread Cup Stone			28597

PG10 User Manual ◄ 15

SPECIFICATIONS