Stanley Black & Decker RD12 user manual To Stop Drilling

Page 11

OPERATION

TO BEGIN DRILLING

NOTE:

Do not operate the drill in the fully advanced posi- tion for more than 5-10 seconds at one time.

1.Engage the control valve on the hydraulic power source to the ON position.

2.To begin drilling, move the control lever on the rail drill toward the “drill bit” symbol. The drill bit will turn and advance simultaneously. Make sure water is spraying from the bit.

TO STOP DRILLING

Move the control lever to the “0” mark to stop the rail drill.

TO RETRACT THE DRILL BIT

Move the control lever to the “retract” symbol to retract the drill bit.

Retract Symbol

Figure 2. Retract the Drill Bit

REMOVING THE DRILL BIT

1.Uncouple the water hose from the rail drill.

2.Move the hydraulic circuit control valve to the OFF position and disconnect from the power supply.

3.From the bit end, turn the bit counter clockwise and pull it out.

STORAGE

•Clean the tool thoroughly.

•Remove the drill bit.

•Advance the piston .250 in./6 mm.

•Drain water from the tool.

•Retract the piston

•Store in a dry area.

COLD WEATHER OPERATION

Preheat the hydraulic fluid at low engine speed. When using the normally recommended fluids, fluid tempera- ture should be at or above 50 °F/10 °C before use.

Use a biodegradeable antifreeze solution such as wind- shield antifreeze in the spray can.

Drain water from the drill when finished using.

RD12 User Manual ◄ 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Hydraulic Rail Drill Weisbeck, Andy Declaration of ConformityTable of Contents Local Safety Regulations Safety SymbolsSafety Precautions Pinch Point Tool Stickers & TagsHose Types Hose Safety TagsTool to Hydraulic Circuit Hose Recommendations Hose RecommendationsHtma / Ehtma Requirements Htma / Ehtma RequirementsOperation Preoperation ProceduresOperating Procedures To Stop Drilling Templates & Hole Guides RE Guard Rail 3 1/32 Elevation KG UIC Tool Protection & Care Problem Cause Solution TroubleshootingRail Templates & Hole Guides SpecificationsAccessories RD12 Parts Illustration Part QTY Description RD12 Parts ListRD12 Parts List

RD12 specifications

Stanley Black & Decker has long been recognized for its commitment to quality and innovation in the tool and hardware industries. One notable product that embodies this dedication is the Stanley Black & Decker RD12, a reciprocating saw that stands out for its performance, versatility, and user-friendly design.

The RD12 features a powerful motor that delivers high-speed cutting action, making it ideal for a variety of applications, from demolition to woodworking. With its cutting stroke length and speed, users can tackle tougher materials with ease, ensuring efficient performance on the job. The saw is designed to handle both wood and metal, showcasing its adaptability across different projects and materials.

One of the standout features of the RD12 is its lightweight and ergonomic design. Weighing in at just a few pounds, it minimizes user fatigue during extended use, allowing professionals and DIY enthusiasts alike to work comfortably. The soft-grip handle enhances control and precision, reducing the risk of slips or mishaps.

Technologically, the RD12 is equipped with a tool-less blade change system, which significantly increases convenience. Users can quickly swap out blades without the need for additional tools, saving valuable time and maintaining workflow. This feature is particularly useful in fast-paced work environments where efficiency is essential.

The RD12's built-in variable speed trigger allows users to control the cutting speed, giving them the flexibility to adjust their approach depending on the material and application. This level of control contributes to more precise cuts and enhances overall performance.

Durability is another hallmark of the RD12. Constructed from robust materials, this saw is built to endure demanding job site conditions. The inclusion of protective features, such as a heavy-duty housing and advanced cooling mechanisms, helps prevent overheating, keeping the motor in optimal working condition.

For safety, the RD12 incorporates a lock-off switch, which prevents accidental starts and provides peace of mind during operation. This is an essential feature for both professional tradespeople and home users, ensuring safe handling at all times.

In conclusion, the Stanley Black & Decker RD12 is an impressive reciprocating saw that combines power, versatility, and user-friendly features. With its innovative technologies, such as the tool-less blade change and variable speed settings, along with its ergonomic design, the RD12 represents a reliable choice for anyone looking to invest in a high-quality cutting tool. Whether you're a seasoned professional or an enthusiastic DIYer, the RD12 stands ready to tackle a multitude of cutting tasks with precision and ease.
Top Page Image Contents