Stanley Black & Decker HGE12 user manual Read ALL Instructions

Page 7

SAFETY PRECAUTIONS

WARNING: Some dust created by power sand- ing, sawing, grinding, drilling, and other construction activities contains chemicals known to cause can- cer, birth defects or other reproductive harm. Some examples of these chemicals are:

Lead from lead-based paints,

Crystalline silica from bricks and cement and other masonry products, and

Arsenic and chromium from chemically-treated lumber (CCA).

Your risk from these exposures varies, depending on how often you do this type of work.

To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are spe- cially designed to filter out microscopic particles.

Avoid prolonged contact with dust from power sand- ing, sawing, grinding, drilling, and other construc- tion activities. Wear protective clothing and wash exposed areas with soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin may promote absorption of harmful chemicals.

WARNING: Use of this tool can generate and/or disburse dust, which may cause serious and perma- nent respiratory or other injury. Always use NIOSH/ OSHA approved respiratory protection appropriate for the dust exposure. Direct particles away from face and body.

WARNING: Always wear proper personal hear- ing protection that conforms to ANSI S12.6 (S3.19) during use. Under some conditions and duration of use, noise from this product may contribute to hear- ing loss.

CAUTION: When not in use, place tool on its side on a stable surface where it will not cause a trip- ping or falling hazard. Some tools with large battery packs will stand upright on the battery pack but may be easily knocked over.

Important Safety Instructions for All Battery Packs

When ordering replacement battery packs, be sure to include model number and voltage. The battery pack is not fully charged out of the carton. Before using the battery pack and charger, read the safety instructions below. Then follow charging procedures outlined.

READ ALL INSTRUCTIONS

Do not charge or use battery in explosive atmospheres, such as in the presence of flam- mable liquids, gases or dust. Inserting or removing the battery from the charger may ignite the dust or fumes.

NEVER force battery pack into charger. DO NOT modify battery pack in any way to fit into a non- compatible charger as battery pack may rupture causing serious personal injury.

Charge the battery packs only in DEWALT char- gers.

DO NOT splash or immerse in water or other liq- uids.

Do not store or use the tool and battery pack

in locations where the temperature may reach or exceed 105°F (40°C) (such as outside sheds or metal buildings in summer).

DANGER: Electrocution hazard. Never attempt to open the battery pack for any reason. If battery pack case is cracked or damaged, do not insert into charger. Do not crush, drop or damage battery pack. Do not use a battery pack or charger that has re- ceived a sharp blow, been dropped, run over or dam- aged in any way (i.e., pierced with a nail, hit with a hammer, stepped on). Electric shock or electrocu- tion may result. Damaged battery packs should be returned to service center for recycling.

NOTE: Battery storage and carrying caps are pro- vided for use whenever the battery is out of the tool or charger. Remove cap before placing battery in charger or tool.

WARNING: Fire hazard. Do not store or carry battery so that metal objects can contact exposed battery terminals. For example, do not place battery in aprons, pockets, tool boxes, product kit boxes, drawers, etc., with loose nails, screws, keys, etc. without battery cap. Transporting batteries can possibly cause fires if the battery terminals inadvertently come in contact with conductive materials such as keys, coins, hand tools and the like. The US Department of Trans- portation Hazardous Material Regulations (HMR) actually prohibit transporting batteries in commerce or on airplanes (i.e., packed in suitcases and carry- on luggage) UNLESS they are properly protected from short circuits. So when transporting individual batteries, make sure that the battery terminals are protected and well insulated from materials that could contact them and cause a short circuit.

HGE12 User Manual ◄ 7

Image 7
Contents HGE12 Cordless Inline Rotary Grinder Page Table of Contents Local Safety Regulations Safety SymbolsPersonal Safety Safety PrecautionsWork Area Safety Electrical SafetyService Battery Tool USE and CareRead ALL Instructions Important Safety Instructions for All Battery PacksRbrc Seal Battery & Charger SafetySpecific Safety Instructions for Lithium ION LI-ION Important Safety Instructions for All Bat- tery ChargersChargers Charger SafetyUsing Automatic Tune-Up Mode Charging ProcedureImportant Charging Notes Charge IndicatorsSave These Instructions for FU- Ture USE Operation OperationTroubleshooting MaintenanceMaintenance Charger Cleaning InstructionsHGE12 Models SpecificationsSpecifications Replacement BitsStanley Hydraulic Tools SE Naef Road Milwaukie, Oregon

HGE12 specifications

Stanley Black & Decker has always been at the forefront of innovative tools and equipment. Among its latest offerings is the HGE12, a handheld electric tool that embodies the company’s commitment to quality, durability, and user satisfaction. Designed with both professionals and DIY enthusiasts in mind, the HGE12 presents a range of features that set it apart from its competitors.

One of the main features of the HGE12 is its powerful motor. With impressive wattage, this tool delivers consistent performance, making it easy to tackle tough tasks with ease. The motor is engineered for high efficiency, ensuring that users can complete projects quickly without sacrificing quality or precision.

Another notable characteristic of the HGE12 is its ergonomic design. Stanley Black & Decker understands the importance of user comfort, especially during extended periods of use. Consequently, the HGE12 incorporates a comfortable grip that minimizes fatigue. The balanced weight distribution allows users to maneuver the tool effortlessly, whether they are drilling, cutting, or performing other functions.

The HGE12 also boasts advanced technology that enhances its overall functionality. One such technology is its variable speed control. This feature allows users to adjust the speed according to the material being worked on, providing flexibility for a range of applications. This adaptability makes the HGE12 an ideal choice for different projects, from woodworking to metalworking.

Safety is paramount in tool design, and the HGE12 incorporates various safety features to ensure user protection. The tool is equipped with a two-step activation switch that prevents accidental startup, minimizing the risk of injuries. Additionally, the design includes built-in ventilation to prevent overheating during prolonged use, enhancing both safety and durability.

In terms of maintenance, the HGE12 is designed for easy upkeep. The manufacturer provides clear instructions for regular maintenance, ensuring that the tool remains in optimal working condition for years to come. The use of high-quality materials in its construction also means that the tool is built to last, providing excellent value for investment.

In conclusion, the Stanley Black & Decker HGE12 is a versatile and powerful handheld tool that caters to a variety of needs. With its robust motor, ergonomic design, versatile speed control, and emphasis on safety, it serves as an essential addition to any toolkit. Whether you're a professional contractor or a dedicated DIYer, the HGE12 stands ready to assist with all your projects, making it a reliable and practical choice.