Model PRO-9642CH
Installation Manual
Note : When both Passive Arming and Voltage Sensing are selected, you must hardwire the driver’s door pin switch in order to begin the passive arming sequence.
RF Programmable Features : |
| ||
Feature Selection | 1 Chirp | 2 Chirps | |
1st Door L/UL |
| 1 Sec. | 3.5 Sec. |
2nd Accy Lock |
| Auto Lock On | Auto Lock Off |
3rd Accy. UL |
| Auto UL Dr. | Auto UL All |
4th Passive Locks |
| Passive | Active |
5th Passive/Active Arm | Passive Arm | Active Arm | |
6th Voltage Sense |
| Voltage Sense | Hardwire |
7th Siren/Horn |
| Siren/Horn | Siren Only |
8th Horn Chirp |
| 10mS | 16mS |
9th Override Method | Custom Code | Valet | |
10th Two Step Unlock | On | Off | |
11th Chirp Delete From Tx | On | Off | |
To program these selectable features; |
| ||
|
| Action |
|
| Turn ignition on No response |
| |
| Press and release the valet switch 3 times | ||
| Within 3 seconds, turn ignition Off | ||
First | Then On |
|
|
| Press transmitter Lock button to change | ||
| Press transmitter Lock button to change | ||
|
| or |
|
Second | Press and release the valet switch | ||
| Press transmitter Lock button to change | ||
|
| or |
|
Third | Press and release the valet switch | ||
| Press transmitter Lock button to change | ||
| Press transmitter Lock button to change | ||
|
| or |
|
Fourth | Press and release the valet switch | ||
| Press transmitter Lock button to change | ||
|
| or |
|
Fifth | Press and release the valet switch | ||
| Press transmitter Lock button to change | ||
|
| or |
|
Sixth | Press and release the valet switch | ||
| Press transmitter Lock button to change | ||
|
| or |
|
Seventh | Press and release the valet switch | ||
| Press transmitter Lock button to change | ||
| Press transmitter lock button to change | ||
Sixth | Press and release the valet switch | ||
| Press transmitter Lock button to change | ||
|
| or |
|
Seventh | Press and release the valet switch | ||
| Press transmitter Lock button to change | ||
| Press transmitter lock button to change | ||
3 Chirps | 4 Chirps | Default |
1 Sec L, Dbl. U/L |
| 1 Sec. |
|
| Auto Lock Off |
Auto UL Off |
| Auto UL Off |
|
| Active |
|
| Active Arm |
|
| Hardwire |
Horn Only |
| Siren/Horn |
30mS |
| 16mS |
|
| Valet |
|
| Off |
|
| Off |
System Response
1 Chirp - LED 1 flash Short chirp, then long chirp
1 chirp = 1 second door locks
2 chirps = 3.5 second door locks
3 chirps = 1 sec. lock, dbl 1 sec. unlock
2 chirps = auto locks off
1 chirp = auto locks on
3 chirps = auto unlock off
1 chirp = auto unlock dr.
2 chirps = auto unlock all
2 chirps = active locks
1 chirp = passive locks
2 chirps = active arming
1 chirp = passive arming
2 chirps = hardwire
1 chirp = voltage sense
1 chirp = siren and horn output
2 chirps = siren output only
3 chirps = horn output only
2 chirps = hardwire
1 chirp = voltage sense
1 chirp = siren and horn output
2 chirps = siren output only
3 chirps = horn output only
Page 1
Rev A to show PBLED 05/06
128-6623A
1 of 8