Control Panel Operation

Dehumidifying and cooling operation

The operating range for cooling operation is 60°F - 90°F, and the operating range for dehumidifying is 68°F - 88°F.

Power source

•The AC socket must be firm and reliable.

•Don’t connect the portable air conditioner to a multiple socket outlet which is also being used for other electrical appliances.

•Insert the AC power plug securely into the AC socket before using the unit, when it beeps after two seconds, press ON/ OFF button, the unit begins to run.

LCDI power cord information

All Friedrich portable air conditioners are shipped from the factory with a Leakage Current Detection Interrupter (LCDI) equipped power cord. The LCDI device meets the UL and NEC requirements for cord connected air conditioners effec- tive August 2004.

To test your power supply cord:

1.Plug power supply cord into a grounded 3 prong outlet.

2.Press RESET (See drawing below).

3.Press TEST (listen for click; Reset button trips and pops out).

4.Press and release RESET (listen for click; Reset button latches and remains on). The power supply cord is ready for operation.

NOTE: LCDI device is not intended to be used as a switch. Once plugged in the unit will operate normally without the need to reset the LCDI device.

If the device fails to trip when tested or if the power supply cord is damaged it must be replaced with a new supply cord from the manufacturer. We recommend you contact our Technical Assistance Line at (800) 541-6645. To expedite service, please have your model and serial number available.

			WARNING: NEVER
			CUT OR REMOVE
			THE GROUNDING
RESET	TEST		PRONG FROM
			PLUG. NEVER USE
			EXTENSION CORDS
		Test Button	TO OPERATE AN
		Test Button	AIR CONDITIONER.
		Reset Button	AIR CONDITIONER.
		Reset Button

Mode control

The mode control has three settings– Cool, Dehumidify and Fan. The settings are adjusted with the Mode Control button. A light will indicate which setting is currently being used.

Cooling operation

1.Press MODE button to choose the cooling mode, LCD window will show “cool”.

During the cooling operation, always place the air exhaust hose through an open window.

2.Repeatedly press TEMP + or TEMP - button to set a proper room TEMP. between 60°F - 90°F.

3.Press FAN SPEED button to choose between low, medium and high speeds.

NOTE:

In order to improve the cooling efficiency:

a)If your room is directly exposed to the sun, draw the curtains.

b)Do not place near other heat source.

Dehumidifying Operation

1.Keep the windows and the doors closed to aid in effectively dehumidifying the room.

2.Press MODE button to choose the dehumidifying mode, LCD window will show “DRY”, the fan speed cannot be adjusted.

When used as dehumidifier only it is not necessary to install the exhaust hose.

Time Set Function

To set the time to start the machine, with the unit off (but power supplied), press TIMER button, the LCD window will show

“”, continually press the TIMER button, set the preferred start time. The setting range is 1-24 hours.

To set the time to stop the machine, with the unit running,

press TIMER button, the LCD window will show “”, continually press the TIMER button ,set the preferred time to stop the machine. The setting range is 1-24 hours

NOTE: During timer mode if the TIMER button is pressed again it will cancel the timer operation.

Warning Light

Condensed water may accumulate in the unit. If the internal tank becomes full, the Warning Light will come on and the unit will not operate until the unit has been drained.

P012A, P09B, P09A, P012B specifications

Friedrich P12A and P09A are advanced small-caliber, semi-automatic handguns known for their precision engineering and innovative features. The P12A, a compact version, is designed for concealed carry, while the P09A offers a full-sized platform ideal for duty use and sport shooting.

One of the standout characteristics of both models is their ergonomic design. The grip contours are crafted to fit comfortably in hand, providing excellent control and reducing recoil, making them suitable for shooters of varying experience levels. The textured polymer frames contribute to a secure hold in various conditions, enhancing performance during rapid fire.

Both models are chambered in 9mm, a popular choice for its manageable recoil and availability. The P12A typically features a magazine capacity of 12 rounds, while the P09A can hold up to 19 rounds, providing ample firepower without the need for frequent reloads. The magazines are designed for reliability, with smooth feeding and easy loading, which is crucial in critical situations.

A notable technological advancement in both models is the incorporation of a striker-fired mechanism. This system results in a consistent trigger pull, enhancing accuracy and allowing shooters to maintain focus on their target without having to adjust to varying trigger weights. Additionally, they are equipped with adjustable sights that allow for fine-tuning based on individual preferences and shooting styles, promoting improved targeting.

Safety features in the P12A and P09A are designed with user security in mind. Both firearms include an integrated trigger safety and striker block, preventing accidental discharges. These elements work in tandem to provide peace of mind while handling or carrying the weapon.

Durability is another essential aspect of the Friedrich P12A and P09A. Built with high-quality materials, they are resistant to corrosion and wear, ensuring they can withstand tough conditions and extensive use. The surfaces of both models are treated to enhance durability while maintaining a low profile, ideal for tactical operational needs.

In summary, the Friedrich P12A and P09A handguns embody a blend of innovative technologies and practical features. Their ergonomic design, reliable feeding systems, and enhanced safety measures make them appealing choices for both casual and professional shooters looking for dependable performance in various scenarios.