Friedrich P-09 Condensation Handling, Maintenance /Service, Draining Water, Internal Water Level

Page 7

Condensation Handling

Draining Water

Your ZoneAire® Portable Air Conditioner is designed to evapo- rate the condensation removed from the interior space through the exhaust hose. Under certain conditions it is possible that the unit will not evaporate 100% of the removed moisture.

The unit is designed with a built-in reservoir and pump to ac- cumulate excess condensate and help dispose of it.

Internal Water Level

1.Under any mode if the water level is in the “low” area the unit will function normally.

2.If the water level is in the “normal” area the unit will continue to function normally with the internal recirculation pump run- ning to evaporate the water. You may hear the pump run at times.

3.If the water level is in the “high” area the unit will function normally and the water pump will work for 10 minutes. After that, if the water level returns to the “low” or “normal” level the unit will function normally. If after running 10 minutes, the water level is still in the “high” area the machine will turn off and the WATER FULL lamp on the control panel will il- luminate. The LCD window indicates failure code E5.

The water can be drained from the unit either by removing the base stopper and letting the water drain by gravity. Or the con- densate pump hose may be used to direct the condensate to a drain location like a sink.

1.When the WATER FULL lamp is on unplug the unit and move the unit to a suitable location for draining the conden- sation.

2.If using the gravity drain method ensure that the base stop- per is located above a suitable area for draining the conden- sate and remove the stopper. Re-install the stopper once all water has drained.

If using the condensate removal pump ensure that the conden- sate pump hose is located in a proper area for drainage. Re- store power to the unit and press both the TIMER and SWING buttons simultaneously and the pump will begin to run.

3.Return the unit to the original location and restore power and duct connections.

4.The WATER FULL indicator should be off and the unit will return to normal operating mode.

water tank

water

Maintenance /Service

!WARNING

•Disconnect the power before cleaning.

•Make sure there is no power to the unit before beginning to maintain or repair the unit in or- der to prevent accidents caused by electrical shock.

Cleaning the air filter

If the air filter is blocked with a lot of dust, the air flow volume will be reduced. Clean the filter once every two weeks.

Open and clean the air filter:

1.Pull the filter out as shown in the drawing.

2.Take out the air filter from the filter cover.

3.Wash the air filter by immersing it gently into warm (about 40°C or 104°F) water with a neutral detergent or vacuum the filter clean.

4.Rinse the filter and dry it thoroughly in a shaded place.

5.Install the air filter back to its original place.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Portable Air Conditioner Foreword Table of ContentsIntroduction Front Back Unit Identification and FunctionDisplay Screen Control PanelPress the CLK button Remote Control Identification and FunctionControl Panel Operation Draining Water Maintenance /ServiceCleaning the air filter Condensation HandlingTroubleshooting Self diagnosis function InstallationSelection of installation location Instructions to install hoseWindow kit installation Instructions to install hose contdInstallation accessories Water drainage hose installationSet Portable AIR Conditioners Limited Warranty

P-09 specifications

The Friedrich P-09 is a notable evolution in the field of air pistols, recognized for its advanced features and innovative technologies. Designed for sport shooting, training, and recreational use, the P-09 combines precision engineering with user-friendly characteristics that appeal to both beginners and experienced shooters.

One of the standout features of the Friedrich P-09 is its impressive blowback action. This design not only enhances the realism of shooting but also provides a more engaging experience by mimicking the feel of a real firearm. The pistol operates on compressed CO2, ensuring a consistent propulsion system that delivers reliable performance across numerous shots. The CO2 cartridge is cleverly housed within the grip, maintaining a clean aesthetic while allowing for quick and easy swaps during extended shooting sessions.

The P-09's semi-automatic mechanism allows for rapid follow-up shots, making it ideal for both target practice and competitive shooting scenarios. Its velocity can reach up to 130 meters per second, which not only ensures accuracy but also meets the standards for many shooting sports. The pistol is often equipped with adjustable hop-up systems, providing shooters with the ability to fine-tune their shots for improved precision.

Ergonomics play a significant role in the P-09’s design. The textured grip offers a secure hold, promoting comfort and control during use. Its lightweight build, combined with a balanced weight distribution, allows for extended shooting without undue fatigue. The pistol's controls are intuitively placed, ensuring quick access to the safety features and magazine release.

Aesthetically, the P-09 showcases a modern design with a matte finish that is not only visually appealing but also helps reduce glare during use. Many variants come with accessory rails, allowing shooters to customize their setup with lights or lasers, further enhancing versatility.

In conclusion, the Friedrich P-09 stands out due to its blend of innovative features, technological advancements, and ergonomic design. Ideal for anyone looking to hone their shooting skills or enjoy recreational shooting, the P-09 represents a prime example of modern air pistol engineering, making it a favorite among enthusiasts.
Top Page Image Contents