Lincoln Electric DC-655 technical specifications Recommended Options, Air Filter Kit

Recommended Options

Digital Meter Kit

Displays amps and volts.

Order K1482-1.

Air Filter Kit

Mounts on the front of the machine and uses clean- able, all metal air filters.

Order K1486-1.

Remote Control

Adapter

Y connection adapter for connecting K857 Remote Voltage Control (6 pin plug connection) and wire feeder input cable (14 pin plug con- nection) to DC-655 14 pin receptacle.

Order K864.

TIG Module

Supplies high frequency for superior starting, contactor control, remote control capability and a gas valve for TIG welding.

Order K930-2.

Foot Amptrol™

Varies current for making critical TIG welds. Depress pedal to increase current. Depressing pedal fully achieves maximum set current. Fully raising the pedal finishes the weld and starts the afterflow cycle on systems so equipped. Includes 25 ft. (7.6m) control cable.

Order K870.

Dual Process Switch

Mounts on front of machine and provides polarity change or electrical isola- tion. Great for arc gouging applications and where two separate feeders require different output polarity or inductance settings.

Order K1528-1.

Deluxe Adjustable Gas Regulator & Hose Kit

Accommodates CO2, Argon or Argon-blend gas cylin- ders. Includes a cylinder pressure gauge, dual scale flow gauge and 4.3 ft. (1.3m) gas hose.

Order K586-1.

Docking Kit

Provides a means to “dock”
the TIG Module on top of a
flat-roofed power source, or	Amptrol Adapter Kit
any other flat surface meas-
uring at least 10 x 15 in.	Adapts Amptrol’s 6-pin
(254 x 381mm). It includes a	MS-type plug connection to
latch and provisions for a	terminal strip on power
user-supplied padlock to	source.
lock the TIG Module in	Order K843.
place.
Order K939-1.

Paralleling Kit

Permits paralleling of two DC-655’s for welding cur- rents of up to 1300 amps, 100% duty cycle. The “master” DC-655 controls both paralleled machines.

Order K1611-1.

Remote Output Control

Provides 25 ft. or 100 ft. (7.6m or 30m) of remote output control (6 pin plug connection). Requires K864 Control Cable Adapter.

For 25 ft. (7.6m),

Order K857

For 100 ft. (30m),

Order K857-1.

Undercarriage

Platform undercarriage with mountings for two gas cylin- ders at rear of welder.

Order K842.

Accessory Kit

For stick welding. Includes 35 ft. (10.7m) 2/0 electrode cable with lug, 30 ft. (9.1m) 2/0 work cable with lugs, headshield, filter plate, cover plate, work clamp and electrode holder. 400 amp capacity.

Order K704.

Hand Amptrol™

Varies current for making critical TIG welds. Fastens to the torch for convenient thumb control. Comes with a 25 ft. (7.6m) cable. Fully extend the slide forward to achieve maximum current. Returning to the start posi- tion finishes the weld and starts the afterflow cycle on systems so equipped.

Order K963-1

(For smaller handle 9, 17 or 20 series torches).

Order K963-2

(For larger handle 26 or 18 series torches).

Water Valve

For use with TIG Module. Shuts off water flow when the arc is extinguished when using Magnum® water- cooled TIG torches.

Order K844-1.

TIG Control Cable

Extension

Allows the TIG Module to be operated at up to 45 ft. (13.7m) from power source. Connects between the 2 ft. (0.6m) control cable and the TIG Module. 45 ft.

Order K937-45.

[3] www.lincolnelectric.com