A CLOSER LOOK
CV-655 / DH-10 Wire Feeder
For maximum welding flexibility – select the
•
•
• Control Cable – 10 ft.
• .045 Drive Roll
• Magnum 400 Gun & Cable Assembly
• 600 Amp Weld Power Cable – 10 ft.
• Work Clamp
• Harris Flowmeter Regulator and Gas Hose
CV-655 / Cobramatic® Wire Feeder
For aluminum welding, select the industries best aluminum feeding system – Cobramatic.
•
• Cobramatic® Wire Feeder
• .035 Grooved Drive Roll (optional)
• Python® Gun & Cable Assembly
• 600 Amp Weld Power Cable – 10 ft.
• Work Clamp
• Harris Flowmeter Regulator and Gas Hose
(1)Fully assembled, no gun connector required.
(2)Two required.
RECOMMENDED OPTIONS
GENERAL OPTIONS
Digital Meter Kit
Displays amps and volts.
Order K1482-1
Air Filter Kit
Mounts on the front of the machine and uses cleanable, all metal air filters. Not compatible with dual process switch.
Order K1486-1
Dual Process Switch
Mounts on front of machine and provides polarity change or elec- trical isolation. Great for arc goug- ing applications and where two separate feeders require different output polarity or inductance settings. Not compatible with air filter.
Order K1528-1
Remote Output Control
Consists of a control box with choice of two cable lengths. Permits remote adjustment of output. 6 pin connection.
Order K857
for 25 ft. (7.6m).
Order
for 100 ft. (30m).
Remote Control Adapter
Y connection adapter for connect- ing K857 Remote Output Control (6 pin plug connection) and wire feeder input cable (14 pin plug connection) to power source 14 pin receptacle.
Order K864
Undercarriage
Platform undercarriage with mountings for two gas cylinders at rear of welder.
Order K842
CV-655
[3] | www.lincolnelectric.com |