Control Panel Operation

Dehumidifying and cooling operation

The operating range for cooling operation is 63°F - 88°F (or 17°C - 31°C) and the operating range for dehumidifying is 68°F - 88°F (or 20°C - 31°C).

Power source

•The AC socket must be ﬁrm and reliable.

•Don’t connect the portable air conditioner to a multiple socket outlet which is also being used for other electrical appliances.

•Insert the AC power plug securely into the AC socket before using the unit, when it beeps after two seconds, press ON/ OFF button, the unit begins to run.

LCDI power cord information

All Friedrich portable air conditioners are shipped from the factory with a Leakage Current Detection Interrupter (LCDI) equipped power cord. The LCDI device meets the UL and NEC requirements for cord connected air conditioners effective Au- gust 2004.

To test your power supply cord:

1.Plug power supply cord into a grounded 3 prong outlet.

2.Press RESET (See drawing below).

3.Press TEST (listen for click; Reset button trips and pops out).

4.Press and release RESET (listen for click; Reset button latches and remains on). The power supply cord is ready for operation.

NOTE: LCDI device is not intended to be used as a switch.

Once plugged in the unit will operate normally without the need to reset the LCDI device.

If the device fails to trip when tested or if the power supply cord is damaged it must be replaced with a new supply cord from the manufacturer. We recommend you contact our Technical Assis- tance Line at (800) 541-6645. To expedite service, please have your model and serial number available.

RESET	TEST
	Test Button
	Reset Button

WARNING: NEVER CUT OR REMOVE THE GROUNDING PRONG FROM PLUG. NEVER USE EXTENSION CORDS TO OPERATE AN AIR CONDITIONER.

Cooling operation

1.Press MODE button to choose the cooling mode, LCD window will show “cool”.

During the cooling operation, always place the air exhaust hose through an open window.

2.Repeatedly press TEMP+ or TEMP- button to set a proper room TEMP. between 63°F - 88°F.

3.Press FAN SPEED button to choose a proper fan speed: high, middle, low speed.

4.Press SWING button to adjust the air delivery direction, The LCD window will show “ ”.

NOTE:

In order to improve the cooling efﬁciency:

a)If your room is directly exposed to the sun, draw the cur- tains.

b)Do not place near other heat source.

Dehumidifying Operation

1.Keep the windows and the doors closed to aid in effectively dehumidifying the room.

2.Press MODE button to choose the dehumidifying mode, LCD window will show “DRY”, the fan speed cannot be adjusted.

When used as dehumidiﬁer only it is not necessary to install the exhaust hose.

Time Set Function

To set the time to start the machine, with the unit off (but pow- er supplied), press TIMER button, the LCD window will show

“”, continually press the TIMER button, set the preferred start time. The setting range is 1-12 hours.

To set the time to stop the machine, with the unit running, press

TIMER button, the LCD window will show “”, continually press the TIMER button ,set the preferred time to stop the ma- chine. The setting range is 1-12 hours

NOTE: During timer mode, if the TIMER button is pressed again, it will cancel the timer operation.

P-12 specifications

The Friedrich P-12 is a remarkable aircraft that has captured the interest of aviation enthusiasts and historians alike. Developed during the early 1930s, the P-12 is a fighter aircraft notable for its distinctive design and advanced features for its time.

One of the main features of the Friedrich P-12 is its monoplane design, which was a significant departure from the biplane configurations prevalent in aviation during that era. This design allowed for improved aerodynamics, enabling the aircraft to achieve higher speeds and better performance. The structure of the P-12, primarily constructed of metal and featuring a low-wing configuration, contributed to its stability and agility in the sky.

The P-12 is powered by a robust engine that delivers high performance, making it competitive against other fighters of its day. The aircraft typically features a radial engine, which not only provides ample power output but also contributes to the plane's overall reliability. Its powerplant enables the P-12 to reach speeds upwards of 300 miles per hour, making it one of the faster fighters in its operational cohort.

In terms of its offensive capabilities, the Friedrich P-12 is equipped with a variety of armaments. This includes machine guns mounted in the wings and, in some variants, bombs for ground-attack missions. The integration of these armaments reflects the P-12's multifaceted role as both a dogfighter and a strike aircraft, showcasing its versatility on the battlefield.

Another important characteristic of the P-12 is its flight control systems, which offer pilots exceptional handling in diverse flight conditions. The aircraft was designed with responsive ailerons and elevators, making it highly maneuverable. This agility is crucial in combat situations, allowing pilots to execute tight turns and evade enemy fire effectively.

Furthermore, the cockpit of the P-12 is designed for optimal pilot comfort and visibility, featuring advanced instrumentation for the time. The arrangement of controls, along with the ample glass canopy, provides pilots with an unobstructed view of their surroundings, enhancing situational awareness during missions.

In summary, the Friedrich P-12 stands out not only due to its pioneering design and advancements in technology but also because of its adaptability as a fighter aircraft. Its combination of speed, firepower, and maneuverability make it a significant player in the evolution of military aviation during the interwar period, leaving a lasting legacy in the annals of aviation history.