Advantage Lincoln con’t.
•Electrode selection chart on the machine case provides quick and easy reference guide for amperage selection.
•225 amp AC output is enough for 3/16” diameter general purpose mild steel electrodes and 5/32” sizes of other electrodes.
•125 amp DC output is enough for most 1/8” electrodes.
•
•Vermin resistant mesh bottom keeps rodents and pests out of the case.
•Powder paint finish for high corrosion resistance.
•NEMA rated (60 Hz only).
•UL listed and CSA approved (60 Hz only).
•3 year warranty on parts and labor.
•Manufactured under a quality system certified to ISO 9001 requirements.
Warning: Pipe thawing with an arc welder can cause fire, explosion, damage to electric wiring or to the arc welder if done improperly. The use of an arc welder for pipe thawing is not approved by the CSA, nor is it recommended or supported by Lincoln Electric.
Important Safety Note: This welder is not recommended
for use in electrically hazardous conditions such as: damp locations, while wearing wet clothing, on metal structures, or in cramped positions. Use a DC stick or wire welder.
Recommended Options
Wheel Kit | Carbon Arc Torch |
Includes axle, two wheels, and assembly hardware. Can be installed in minutes.
Order K761.
Increases versatility of the welder. Some applications include: welding aluminum and copper alloys, heating, bending and straightening, brazing and soldering.
Convenient thumb control. Rated at 100A at 40V.
Order K1876-1.
Customer Assistance Policy
The business of The Lincoln Electric Company is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the needs of our customers and to exceed their expectations. On occasion, purchasers may ask Lincoln Electric for advice or information about their use of our products. We respond to our customers based on the best information in our possession at that time. Lincoln Electric is not in a position to warrant or guarantee such advice, and assumes no liability, with respect to such information or advice. We expressly disclaim any warranty of any kind, including any warranty of fitness for any customer’s particular purpose, with respect to such information or advice. As a matter of practical consideration, we also cannot assume any responsibility for updating or correcting any such information or advice once it has been given, nor does the provision of information or advice create, expand or alter any warranty with respect to the sale of our products.
Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility of the customer. Many variables beyond the control of Lincoln Electric affect the results obtained in applying this type of fabrication methods and service requirements.
THE LINCOLN ELECTRIC COMPANY
22801 St. Clair Ave., Cleveland, OH