Lincoln Electric IM628 manual Operation, Safety Instructions, Operating Instructions

Page 11

B-1

OPERATION

B-1

 

 

 

Read and understand this entire section before oper- ating your Automatic Start/Stop Arc Sensor.

SAFETY INSTRUCTIONS

Do not attempt to use this equipment until you have thoroughly read all operating and maintenance man- uals supplied with your equipment and any related welding machine it will be used with. They include important safety precautions, operating and mainte- nance instructions and parts lists.

WARNING

ELECTRIC SHOCK can kill.

•Do not touch electrically live parts such as output terminals or internal wiring.

•Insulate yourself from the work and ground.

•Always wear dry insulating gloves.

------------------------------------------------------------------------

WELDING SPARKS can cause fire or explosion.

•Keep flammable material away.

•Do not weld upon containers which have held combustibles.

------------------------------------------------------------------------

ARC RAYS can burn.

•Wear eye, ear and body protection.

------------------------------------------------------------------------

FUMES AND GASES can be dangerous.

• Although the removal of the particu-

late matter from welding smoke may reduce the ventilation requirement, concentrations of the clear exhausted fumes and gases may still be haz- ardous to health. Avoid breathing concentrations of these fumes and gases. Use adequate ventilation when welding. See ANSI Z49.1, "Safety in Welding and Cutting", pub- lished by the American Welding Society.

------------------------------------------------------------------------

WARNING

Only qualified personnel should operate this equip- ment.

ADDITIONAL SAFETY PRECAUTIONS

Always operate this equipment with the filter and arm installed and all covers in place as these provide max- imum protection from moving parts and insure proper vacuum operation and cooling air flow.

OPERATING INSTRUCTIONS

To use the Automatic Start/Stop Arc Sensor, leave the 0/I switch on the hood (See Figure 5) in the 0 (off) position (If using a Mobiflex 200-M, the Start/Stop switch must be in the “Start” position). When an arc is sensed, the sensor will turn on the connected extrac- tion system automatically. When the arc is no longer detected, the sensor will shut the system down after 20 seconds.

Refer to Figure 5:

A.Switch with Lamp Symbol - Operates Lamp.

B.Switch with 0/I- Operates connected extraction fan (Mobiflex 200-M or SF2400 Fan).

A

I

B

O

Fig. 5

For optimum fume-capture, position hood within 10-15 inches (250-400mm) of the arc.

AUTOMATIC START/STOP ARC SENSOR

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Automatic Start/Stop Arc Sensor California Proposition 65 Warnings SafetyElectric Shock can kill Cylinder may explode if damaged Sûreté Pour Soudage a L’Arc Précautions DE SûretéThank You Table of Contents General InstallationGeneral Description Safety PrecautionsInstalling the Sensor Installation Operating Instructions Safety InstructionsOperation Routine Maintenance MaintenanceSymptom Problem Solution TroubleshootingWiring Diagram DiagramsHow To Read Shop Drawings Precaucion Warnung

IM628 specifications

The Lincoln Electric IM628 is a cutting-edge industrial welding machine designed to meet the rigorous demands of various welding applications. With its robust features, advanced technologies, and innovative design, the IM628 stands out as a top choice for professionals in the manufacturing sector.

One of the main features of the Lincoln Electric IM628 is its multi-process capability. This versatile machine supports various welding processes, including MIG, TIG, stick, and flux-cored welding. This flexibility allows it to adapt to different materials and project requirements, making it suitable for a wide range of industrial applications.

Another significant characteristic of the IM628 is its user-friendly interface. The machine is equipped with a digital display and intuitive controls, which simplify the setup and operation for welders of all skill levels. The clear interface provides real-time feedback on settings, ensuring precision in the welding process and reducing the likelihood of errors.

In terms of power and performance, the IM628 boasts a high duty cycle, allowing for extended operation without overheating. With its powerful inverter technology, the machine delivers consistent arc stability and optimal performance across various welding tasks. Users can expect smooth operation and enhanced productivity, making it an ideal choice for high-volume environments.

Additionally, the IM628 incorporates advanced features such as automated settings and memory functions. Welders can save frequently used parameters, allowing for quick transitions between different jobs. This not only streamlines the process but also ensures repeatable results, which is crucial in production settings.

Safety is another priority for the IM628, with integrated features designed to protect both the operator and the machine. Overvoltage and thermal overload protection help to prevent damage and ensure safe operation. Furthermore, the machine is built with durable materials designed to withstand the demands of tough working conditions, enhancing its lifespan and reliability.

In conclusion, the Lincoln Electric IM628 is a versatile and powerful welding machine that combines advanced technology, user-friendly design, and robust safety features. Its multi-process capability and high duty cycle make it suitable for diverse applications, while its intuitive controls and automated functions improve efficiency and ease of use. For professionals seeking reliable performance and exceptional weld quality, the IM628 represents a solid investment in welding technology.
Top Page Image Contents