18 |
| TROUBLESHOOTING | 18 |
|
|
|
|
|
|
| Observe all Safety Guidelines detailed throughout this manual | |||
|
|
|
|
|
| PROBLEMS | POSSIBLE AREAS OF | RECOMMENDED | |
| (SYMPTOMS) | MISADJUSTMENTS(S) | COURSE OF ACTION |
|
|
|
|
|
|
STICK WELDING PROBLEMS
Stick electrode “Blasts Off” when arc | 1. | Weld current may be set too |
is struck. |
| high for electrode size. Reduce |
|
| current control setting, or use a |
|
| larger diameter electrode. |
|
|
|
Stick electrode “sticks” in the weld | 1. | The weld current may be set too |
puddle. |
| low. Increase the current control |
|
| setting or use a smaller diame- |
|
| ter electrode. |
|
|
|
|
|
|
Contact your Local Lincoln Authorized Field Service Facility for technical troubleshooting assistance.
CAUTION
If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your Local Lincoln Authorized Field Service Facility for technical troubleshooting assistance before you proceed.
SQUARE WAVE TIG 175