Troubleshooting

E-2	TROUBLESHOOTING	E-2
	Observe all Safety Guidelines detailed throughout this manual

PROBLEMS

(SYMPTOMS)

POSSIBLE

CAUSE

RECOMMENDED

COURSE OF ACTION

E43 alarm after initial installation of power source and cooler, or when attaching a water cooled torch.

1. Torch water hoses need to be 1. After turning the system ON,

primed.press the COOL ARC® 35 push button to begin priming procedure.

2. There is a blockage in the path of 2. Verify that the coolant path is

the coolant.clear – that there are no twists, kinks, or pinch-points in the coolant hoses.

CAUTION

If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your Local Lincoln Authorized Field Service Facility for technical troubleshooting assistance before you proceed.

COOL ARC® 35