Lincoln Electric K2857-1 Recommended Accessories to Expand Machine Capabilities, Power MIG 180C

RECOMMENDED ACCESSORIES TO EXPAND MACHINE CAPABILITIES

GENERAL OPTIONS

Power Plug Kit (20 amp) Provides four 120V plugs rated at 20 amps each, and one dual voltage, full KVA plug rated at 120/240V, 50 amps. 120V plug may not be compatible with

common household receptacles.

Order K802N

Full-KVA Power Plug

One dual voltage plug rated at 120/240V, 50 amps.

(NEMA 14-50P)

Order T12153-9

GFCI Receptacle Kit

Includes one UL approved 120V ground fault circuit interrupter duplex type receptacle and installation instructions. Replaces the factory-installed 120V duplex receptacle. Each receptacle of

the GFCI duplex is rated at 20 amps. Maximum total current from the GFCI duplex is limited

to 20 amps. Two kits required.

Order K1690-1

Spark Arrestor Kit

Attaches to muffler exhaust tube. Virtually eliminates spark emissions.

Order K1898-1

Canvas Cover

To protect the Ranger® 225 when not in use. Made from attractive red canvas material that is flame retardant, mildew resistant and water repellent.

Order K886-2

All-Terrain Undercarriage

For moving by hand at construction sites. Maneuvers over obstacles. Heavy-duty puncture-resistant (inner tube and sealant) tires.

Order K1737-1

Factory Undercarriage

For moving by hand on smooth surface floors. Heavy-duty, puncture- resistant (inner tube and sealant) tires and front caster. Convenient steering handle.

Order K1770-1

Welding Gas Cylinder/

LPG Tank Holder

Holds welding gas cylinder or LPG tank (for products with LPG engine). For LPG: Use one holder for LPG tank and a second holder for welding gas cylinder. Both holders will attach to the K1770-1 undercarriage.

Order K1745-1

Small Two Wheel Welder Trailer

For heavy-duty road, off-road, plant and yard use. includes pivoting jack stand, safety chains, and 13 in.

(330 mm) wheels. Stiff .120 in.

(3.0 mm) welded rectangular steel tube frame construction is phosphate etched and powder coat painted for superior rust and corrosion resistance. Low sway suspension gives outstanding stability with manageable tongue weight. Wheel bearings are packed with high viscosity, high pressure, low washout Lubriplate® grease. Includes a Duo-Hitch™, a 2 in.

(51 mm) ball/lunette eye combination hitch. Overall width

60 in. (1524 mm). Overall length

110 in. (2794 mm).

Order:

K2635-1 Trailer

K2639-1Fender & Light Kit

K2640-1Cable Rack

STICK OPTIONS

Accessory Kit

For stick welding. Includes 35 ft. (10.7 m) #2/0 electrode cable with lug, 30 ft. (9.1 m) #2/0 work cable with lugs, headshield, filter plate, work clamp and electrode holder. 400 amp capacity.

Order K704

Accessory Kit

For stick welding. Includes 20 ft. (6.1 m) #6 electrode cable with lug, 15 ft. (4.6 m) #6 work cable with lugs, headshield, filter plate, work clamp, electrode holder and sample pack of mild steel electrode. 150 amp capacity.

Order K875

TIG OPTIONS

Pro-Torch™PTA-26V TIG Torch Air-cooled 200 amp torch (2 piece) equipped with valve for gas flow control. 25 ft. (7.6 m) length.

Order K1783-9

Magnum® Parts Kit

Provides all the torch accessories you need to start welding. Parts kit provides collets, collet bodies, a back cap, alumina nozzles and tungstens in a variety of sizes, all packaged in an easy to carry reclosable pack.

Order KP509 for PTA-26V

Square Wave™ TIG 175

For AC TIG welding with square wave performance, use the AC generator of the engine-driven welder to supply the power (full rated output may not be available). Easy setup. Includes torch, foot Amptrol®, gas regulator and hose. Requires the K1816-1 Full KVA Adapter Kit.

Order K1478-5

Invertec® V205-T AC/DC

One-Pak®Package

For AC TIG welding with square wave performance, use the AC generator of the engine-driven welder to supply the power. Easy setup. Includes torch, parts kit, regulator and hose kit, Twist Mate™ torch adapter, work cable with Twist Mate™ end and foot Amptrol®. Requires the K1816-1 Full-KVA Adapter Kit.

Order K2350-2

Full - KVA Adapter Kit

Provides convenient connection of Lincoln Electric equipment having a 240V AC 1-phase plug (NEMA 6- 50P) to the full-KVA receptacle on engine-driven welders.

Order K1816-1

WIRE FEEDER OPTIONS

LN-25 PRO Wire Feeder Portable CC/CV unit for flux-cored and MIG welding with MAXTRAC® wire drive system. Includes gas solenoid and internal contactor.

Order K2613-5

K126™ PRO Innershied® Gun For self-shielded wire with 15 ft. (4.5 m) cable. For .062-5/64 in. (1.6-2.0 mm) wire. Includes K466-10 Connector Kit.

Order K126-12

Drive Roll and Guide Tube Kit

For .068-.072 in. (1.8 mm) cored or solid steel wire.

Order KP1697-068

Magnum® PRO 350 Ready-Pak®15 ft., .035-5/64 in.

Magnum® PRO MIG/flux-cored welding guns are rated 100% duty cycle. The guns are designed for high amperage, high duty cycle applications in extreme environments where heat-resistance and fast serviceability are key.

Order K2652-2-10-45

Drive Roll and Guide Tube Kit

For .035-.045 in. (0.9-1.1 mm) solid steel wire.

Order KP1696-1

POWER MIG® 180C

Premium compact wire welder with continuous voltage control for MIG and flux-cored welding. 30 to 180 amp output range. Get input power from the AC generator of the engine- driven welder with the K1816-1 Full- KVA Adapter Kit (required). Add the K2532-1 Magnum® 100SG Spool Gun for aluminum MIG welding.

Order K2473-1

Ranger® 225 [ 5 ]