Lincoln Electric V155-S TIG Ready-PakWelding Package, Key Controls, Touch Start TIG Mode

A CLOSER LOOK

SYSTEM SELECTION

TIG Ready-Pak®Welding Package

Ordera LincolnTIG Ready-Pak®Packageand get a completeweldingpackage.

Each Package Contains:

•Invertec® V155-S

•Stick electrodeholder and cable [10 ft. (3.0 m)] with Twist-Mate™plug

•Work clamp and cable [10 ft. (3.0 m)] with Twist-Mate™plug

•Fully adjustableshoulder strap

•120/230V input cord [6.6 ft. (2 m)] with a 120V 15 Amp plug

•Extra 120V 20 Amp plug

•Gas Regulator

•PTA-17VTIG torch with Ultraflex™ cable and Twist-Mate™adapter

•PTA-17TIG accessory kit (KP508)

•Easy-Store/Easy-CarrySuitcase

Order:

K2606-1 Invertec® V155-S TIG Ready-Pak®Package

Shown: K2606-1 Ready-Pak®Pkg.

Key Controls

1)Stick/Touch Start TIG® Modes

2)Status Lights

3)Output Control

4)Twist-Mate™Connectors

2

Touch Start TIG® Mode

Machine has a low open circuit voltage in TIG mode to reduce tungsten contamination. Simply touch the tungsten to the work piece and lift off. The machine will instantly ramp up the voltage and current to establish the arc without the use of high frequency.

1

	Two Stick Modes
	Soft Mode
3	Provides a lower arc force level to de-
	liver a smooth arc with reduced spatter.
	It provides a clean flat fillet weld with
	excellent wetting and bead appearance.

For stainless electrodes such as Red Baron® 308L (E308L-16), rutile elec- trodes such as Fleetweld® 37 (E6013),

4and low hydrogen electrodes such as

Excalibur® 7018 MR.

Crisp Mode

Provides a more dynamic arc charac- teristic for welding in all positions.

For cellulosic electrodes such as Fleetweld® 35 (E6011).

Invertec® V155-S

[2] www.lincolnelectric.com