FEATURES
•Low flat-top case can be placed under a workbench or stacked on top of each other for smaller footprint.
•115V or 42VAC wire feeder auxiliary power.
•Twist-Mate®output connectors require no tools for quick and easy hook-up. Two Twist-Mate®Cable Plugs included (K852-95).
| | | | 9 | | |
Key Controls | | | | | |
1. | Positive Twist-Mate®output connector | 10 | | | | 8 |
2. | Low inductance negative Twist-Mate®output connector | | | | |
3. | High inductance negative Twist-Mate®output connector | | | | | |
4. | Voltmeter polarity switch | | | | | 7 |
5. | 14-pin MS-type wire feeder connector | 11 | | | |
| | | |
6. | Circuit breakers | | | | | 6 |
7. | "On/Off" power switch | | | | |
| | | | |
8. | Thermal trip indicator light | | | | | |
9. | Digital Ammeter/Voltmeter display with switch | | | | | |
10. | Output control knob | | | | | |
11. | Remote/Local control switch | | | | | |
| | 1 | 2 | 3 | 4 | 5 |
| | | | | | |
SYSTEM SELECTION
Ready-Pak®Package
Takethe hassle out of ordering — order a Ready-Pak®pre-assembled welding package. Fully assembled and ready to weld — just add wire and gas. Select a Ready-Pak®and use one order number on your order form.
CV-305/ LF-72 Wire Feeder Ready-Pak®Package
Our most popular MIG and flux-coredwelding system!
Order K2395-1
• CV-305 Power Source (208/230/460/3/60)
• LF-72 Bench Model (TwoRoll) Wire Feeder with Universal Wire Reel stand, 10 ft. Control Cable, and .035-.052"solid wire Drive Roll and Guide TubeKits.
• Magnum 400 WeldingGun, 15 ft., .035-.045"wire
• Work (15 ft.) and Wire Feeder (10 ft.) Power Cables Package
• Harris Flowmeter Regulator and Gas Hose.
(Order Swivel Kit K2332-1 for even more flexibility!Note: Can't be used | Shown: |
at the same time with undercarriagewhile gas cylinder(s)are installed.) |
| CV-305 / LF-72 Wire Feeder Ready-Pak®Package |
| CV-305 |
[2] | www.lincolnelectric.com |
