Personal Safety

to whether the outlet is properly

grounded. If the tools should electrically mal- function or break down, grounding provides a low resistance path to carry electricity away from the user.

5.Avoid body contact with grounded sur- faces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded.

6.Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

7.Do not abuse the cord. Never use the cord to carry the tools or pull the plug from an outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock.

8.When operating a power tool outside, use an outdoor extension cord marked “W-A” or “W”. These cords are rated for outdoor use and reduce the risk of electric shock.

9.Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

10.Dress properly. Do not wear loose cloth- ing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.

11.Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on invites accidents.

12.Remove adjusting keys or wrenches before turning the tool on. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury.

13.Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations.

14.Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions. Ordinary eye or sun glasses are NOT eye protection.

Tool Use and Care

15.Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.

16.Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.

17.Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the switch is dangerous and must be repaired.

18.Disconnect the plug from the power source before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally.

19.Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.

20.Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with sharp cutting edges are less likely to bind and are easier to control.

21.Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tools operation. If damaged, have the tool ser- viced before using. Many accidents are caused by poorly maintained tools.

22.Use only accessories that are recom- mended by the manufacturer for your

4101RH specifications

The Makita 4101RH is a powerful and versatile tool designed specifically for cutting through a variety of materials with precision and ease. This industrial-grade saw is especially popular among professionals in construction, electrical, and plumbing industries, thanks to its robust capabilities and user-friendly features.

One of the standout features of the Makita 4101RH is its high-performance motor. Equipped with a 12 Amp motor, this saw delivers a staggering 3,800 RPM, ensuring efficient cutting power and fast operation. This makes it ideal for demanding tasks that require both speed and accuracy. The compact and lightweight design of the 4101RH, weighing just over 5 pounds, further enhances its portability, allowing users to maneuver it easily on job sites.

The 4101RH utilizes a unique linear ball bearing slide system that promotes smooth and accurate cutting. This technology minimizes drag during operation, resulting in cleaner cuts and reduced wear on the blade. The saw’s adjustable cutting depth feature is another significant advantage, allowing users to make precise cuts up to 1-3/8 inches deep in various materials, including wood and drywall.

Safety is a top priority for Makita, and the 4101RH is no exception. It includes an electric brake that stops the blade quickly when the trigger is released, reducing the risk of accidents and enhancing user control. Additionally, the ergonomic rubberized grip provides comfort during extended use, minimizing fatigue and strain.

Another remarkable aspect of the Makita 4101RH is its ease of maintenance. The saw features a built-in dust collection system that helps keep the work area clean, while also prolonging the life of the tool by reducing debris exposure. The easily accessible carbon brushes contribute to straightforward maintenance, allowing for quick replacements when needed.

In summary, the Makita 4101RH is a high-quality, efficient saw designed to meet the rigors of various cutting applications. With its powerful motor, innovative technologies, and focus on user safety and comfort, it stands out as a reliable choice for professionals seeking a dependable tool for their cutting needs. Whether working on construction sites or undertaking home improvement projects, the Makita 4101RH delivers the performance and precision needed for successful results.