Philips SCM4480/27 manual Functional overview fig. a, Operation, Technical specifications

Page 5

SCM4480_27 05-03-2008 15:44 Pagina 5

4 Functional overview (fig. A)

1P H I L I P S

Lights up when a 5V device is charging (when no device is connected, the PHILIPS logo will flash).

Flashes when the device is fully charged.

2Foldable power plug Connects to the wall outlet.

3USB port

Connects to 5V DC devices (mobile telephones, MP3 players, etc.).

5 Operation

Charging devices - preparation

1Check the maximum input voltage (V DC) of the device you wish to connect. For this see the user manual that came with the device.

2Make sure the device does not consume more current (mA) than 350 mA.

3Check what connector tip is required for your device. See the compatibility sheet for the proper tip for your device.

Charging 5V devices (fig. B)

1Insert the plug of the USB cable into the USB port (3).

2Connect the connector tip to the USB cable.

3Insert the connector tip into the power supply jack of the device.

> P H I L I P S lights up when a device is charging.

> P H I L I P S will flash when the device is fully charged.

4Disconnect the device from the USB charger.

5Disconnect all cables from the device and from the USB charger.

6 Technical specifications

Rated input: 100V - 240V AC (50/60Hz), 0.2A

Rated output: 5.4V, 350 mA

Operating temperature: -10ºC - 40ºC

Size: 70.3 x 55.5 x 35.5 mm (h x w x d)

Weight: 70 g

Maximum battery capacity for charging is 1,200mAh, battery type is Li-Ion or Lithium Polymer

Power consumption:

-in Off mode: 0 W;

-in Standby mode: 0.25 W.

7 Troubleshooting

Problem

Possible cause

• Solution

USB charger does not charge connected device

Voltage of device does not correspond with that of USB charger.

Refer to the user manual that came with the device.

– Improper connection between device and USB charger.

Make sure that the USB cable is properly inserted into the device and the USB charger.

– Damaged USB cable or connector tip.

Replace USB cable and/or connector tip.

– Wrong connector tip used.

Check connector tip and replace if necessary.

– Non supplied USB cable / connector tip used.

Replace with supplied USB cable/connector tip.

– Problems with electrical circuit of USB charger.

Take the USB charger to your local distributor.

ENGLISH

5

Image 5
Contents SCM4480/27 SCM448027 05-03-2008 1544 Pagina SCM448027 05-03-2008 1544 Pagina What’s in the box? Important safety instructionsYour universal USB charger Troubleshooting Technical specificationsFunctional overview fig. a OperationFor interactive help and frequently asked questions MaintenanceNeed help? FCC complianceContenu de l’emballage Votre chargeur USB universelConsignes de sécurité importantes Chargeur USB universelCaractéristiques techniques Aperçu des fonctionnalités fig. aFonctionnement DépannageConformité FCC EntretienBesoin d’aide? Contenido de la caja Cargador USB universalInstrucciones importantes de seguridad Cargador USB universalResumen del funcionamiento figura a Solución de problemasFuncionamiento Especificaciones técnicasCompatibilidad con FCC Mantenimiento¿Necesita ayuda? SCM448027 05-03-2008 1544 Pagina SCM448027 05-03-2008 1544 Pagina SCM448027 05-03-2008 1544 Pagina SCM448027 05-03-2008 1544 Pagina