| INSTALLATION |
| ||
|
|
|
|
|
Read this entire installation section before you start installation.
SAFETY PRECAUTIONS
Do not attempt to use this equipment until you have thoroughly read all installation, operating and mainte- nance information supplied with your equipment. They include important safety precautions and detailed operating and maintenance instructions.
WARNING
ELECTRIC SHOCK can kill.
•Do not touch electrically live parts such as internal wiring.
•Turn the input power off at the fuse box before working on this equipment.
•Have a qualified person install and ser- vice this equipment.
MOVING PARTS can injure.
•Do not operate with covers open or fil-
ter removed.
•Keep away from moving parts.
Only qualified personnel should install, use or service this equipment.
GENERAL DESCRIPTION
Lincoln’s LFA extraction arms are
Installation procedures for the
If installing the arm on a Mobiflex
refer to the Mobiflex
If installing the arm on a Mobiflex
refer to the Mobiflex
If installing the arm with an SF2400 Fan,
refer to the SF2400 Fan manual for installation information
This manual covers installation of a:
on a
If installing the arm on an Extension Crane
without a
WARNING
The installer is responsible for following local safety codes and regulations.
Before drilling, verify locations of existing gas, water, or electrical conduits.
•Assembled arm pieces
•Flexible hose, (2) 8” Rubber seals for hood hinge
•(2) 8” Rubber seals for base hinge
•Hood assembly
•(2) Bolts, M8x1.25, 45mm long (about 1.75”)
•(2) Nuts, M8
•Hose running guard
•Clamping pin for red plastic ring
•Metal rotating hinge
•Red plastic ring
•(2) Bracket pieces
•Hanging Adapter
•Spring Bracket
•Flexible Hose, (2) 8” Rubber bands for arm base
•(2) Bolts, M8x1.25, 45mm long (about 1.75”)
•(4) Bolts, M8x1.25, 75mm long (about 3.00”)
•(6) Nuts, M8
•(6) Washers, M8
LFA 3.1 & 4.1 FUME EXTRACTION ARMS