General Options, Power Feed 10M, 15 ft. 7.6m

RECOMMENDED OPTIONS

GENERAL OPTIONS

Magnum® Gas-Shielded Gun & Cable

Assemblies

Available 200-550 amps, air-cooled, gas- shielded welding guns. Dual procedure capability with gun trigger lock available on 400 amp gun.

See bulletin E12.10

Magnum® Self-Shielded Gun & Cable

Assemblies

Available 250-600 amps.

See bulletin E12.110

Push-Pull Guns

The Python®, CobraMAX™ and Prince® XL provide optimum push-pull performance at a variety of amperages. Available in air-cooled or water-cooled models.

Order K2297-X, K2212-X, and K2252-X

Push-Pull Gun Connection Kit

Required for aluminum welding with the Prince XL, Python and CobraMax air or water-cooled push-pull guns. Includes power block, gun bushing, gas hose adapter, torch gas bypass valve (required for Prince XL Gun only), and wire reel brake limiter. Requires aluminum drive roll kit.

Order K2339-1

Dual Procedure Switch

Allows the use of two welding procedures with each Lincoln Magnum gun connected to an LN-10, DH-10 or Power Feed 10M Bench or Boom model.

15 ft. (7.6m).

Order K683-3

ArcLink “T” Connector Kit

For connecting multiple feeders to a single power source.

Order K2429-1

Foot Amptrol® Connector Kit

Provides 25 ft. (7.6m) of remote ouput control for TIG welding. (6 pin plug connection).

Order K2320-1

Wire Straightener

For Lincoln Electric 10 series wire feeders. Straightens wire for better, smoother feeding.

Order K1733-1

Spindle Adapter for 14 lb. (6 kg)

Innershield® Coils

Permits 14 lb. (6 kg) Innershield electrode coils to be mounted on 2” (51 mm) O.D. spindles.

Order K435

Spindle Adapter for 8” O.D. Spools

Permits 8” (200mm) O.D. spools to be mounted on 2” (51mm) O.D. spindles.

Order K468

GENERAL OPTIONS

30 lb. (14 kg) Readi-Reel® Adapter

Adapts 22-30 lb. (10-14 kg) Lincoln Readi-Reels of electrode to 2” (51mm) spindle.

Order K363P

Wire Reel Cover Kit

Plastic enclosure for up to 44 lb. (20 kg) wire packages.

Order K1634-1

50-60 lb. Readi-Reel® Adapter

Adapts 60 lb. (27.2 kg) coils of Lincoln electrode to 2” (51mm) spindle.

Order K438

50-60 lb. Coil Adapter

Adapts 50-60 lb. (22.6-27.2 kg) coils of Lincoln electrode to 2” (51mm) spindle.

Order K1504-1

Plastic Wire Cover

Plastic enclosure for up to 60 lb. (27.2 kg) wire packages.

Order K1634-2

Incoming Bushing for Lincoln Conduit

Feed Plate Incoming Bushings connect directly to wire conduit (not included), for use in boom system, long distances, or large payoff packages. Bushings can be used with any wire conduit (K515 or K565).

Order K1546-1for .025-1/16” wire Order K1546-2for 1/16-1/8” wire

Gas Guard Regulator

For CO2 and Argon blend gases. Reduces surge caused by excess pressure in supply hose. Includes adjustable flow regulator with removable adjustor key.

Order K659-1

Water Connection Kit

Includes fittings for use with water- cooled guns and Magnum Coolers. Kit provides for one gun.

Order K590-6

Magnum Flow Sensor

Rotary Flow Sensor with Leads monitors water cooling flow and shuts off power to gun if water stops.

Order K1536-1

Caster Kit — Light Duty

Mounts to the Universal Wire Reel Stand. Allows for easy movement of wire feeder.

Order K1556-1

6000 Series Welding Arm

Create a safe, uncluttered work environment where floor space is used effectively with a Lincoln Series 6000 Welding Arm. Glide the arm effortlessly into position when in use or swing it conveniently against a wall or beam for safe, out-of-the-way storage. An 18” x 18” (457 x 457mm) footprint ties up very little floor space.

Order K1778-1

Power Feed 10M

[7]	www.lincolnelectric.com