|
| 003042 | Spade grip |
|
|
| |
1 | 2 |
| The spade grip can be installed in any position as shown in |
|
| ||
|
|
| the figure. To change the position, loosen the hex bolts (both |
|
|
| sides) with a hex wrench and turn the spade grip to the |
|
|
| desired position. Then tighten the hex bolts securely. After |
| 3 |
| reposition the grip, return the hex wrench to the wrench |
|
| holder. | |
|
|
| |
1. Spade grip |
|
| CAUTION: |
2. Wrench holder |
|
| |
3. Hex wrench |
|
| • Do not fix the spade grip beyond the limits of the arrow. |
|
|
| Be cautious that your hand is not caught in the grip. |
|
| 003043 | Keep the hand away from the drill chuck. They can lead |
|
|
| |
|
|
| to serious accidents. |
|
|
| • Always be sure that the hex bolts (both sides) of the |
|
|
| spade grip are tightened securely. |
| 003054 | Installing or removing drill bit |
|
| To install the bit, place it in the chuck as far as it will go. |
|
| Tighten the chuck by hand. Place the chuck key in each of |
|
| the three holes and tighten clockwise. Be sure to tighten all |
|
| three chuck holes evenly. |
|
| To remove the bit, turn the chuck key counterclockwise in just |
1 |
| one hole, then loosen the chuck by hand. |
1. Chuck key |
| After using the chuck key, be sure to return to the original |
|
| position. |
9