Craftsman 919.16558 owner manual Service and Adjustments, To Replace or Clean Check Valve, Ring

Page 18

SERVICE AND ADJUSTMENTS

All maintenance and repair operations not listed must be performed by Trained Service Technician.

Risk of Unsafe

Operation. Unit

cycles automatically when power is on. When servicing, you may be exposed to voltage sources, compressed air, or moving parts. Before servicing unit unplug or disconnect electrical supply to the air compressor, bleed tank of pressure, and allow the air compressor to cool.

To Replace or Clean Check Valve

1.Release all air pressure from air tank. See "To Drain Tank" in the Maintenance section.

2.Set the On/Auto/Off lever to "OFF" and unplug unit.

3.Remove the regulator ring and remove the console cover.

Regulator

Cover

Ring

 

4.Remove shrouds.

5.Using an adjustable wrench loosen outlet tube nut at air tank and pump. Carefully move outlet tube up away from check valve.

 

 

 

Nut

 

Outlet Tube

 

 

 

 

 

Pressure

 

 

 

 

Relief

 

 

 

 

 

Check

Tube

 

Valve

Nut

 

 

 

 

 

 

 

 

6.Using an adjustable wrench loosen pressure relief tube nut at air tank and pressure switch. Carefully move pressure relief tube away from check valve.

7.Unscrew the check valve (turn counterclockwise) using a 7/8" open end wrench. Note the orientation for reassembly.

8.Using a screwdriver, carefully push the valve disc up and down. NOTE: The valve disc should move freely up and down on a spring which holds the valve disc in the closed position, if not the check valve needs to be cleaned or replaced.

Screwdriver

In open position nothing is visible.

In closed position disc is visible.

9.Clean or replace the check valve. A solvent, such as paint or varnish remover can be used to clean the check valve.

10.Apply sealant to the check valve threads. Reinstall the check valve (turn clockwise).

11.Replace the pressure release tube. Tighten nuts.

A00854

18- ENG

Page 17 Page 19
Image 18
Page 17 Page 19
Contents AIR Compressor Table of Contents Important Safety Instructions Specification ChartSafety Guidelines Definitions Serious injury Result in property damageHazard What Could HappenWhat can Happen Hazard Never operate the compressor with Belt can cause serious injury if theyFire, Inhalation, Damage to Vehicle Surfaces Glossary AccessoriesAccessories Duty CycleAssembly Grounding Instructions InstallationLocation of the Air Compressor Plug Grounded Outlets Grounding PinExtension Cords Voltage and Circuit ProtectionOperation Description of OperationDrain Valve The drain valve Check Valve When the air compressor Pressure Release Valve The pressure releaseHow to Start Customer Responsibilities MaintenanceTo Check Safety Valve To Drain TankAir Filter Inspection Replacement Air Compressor Pump Intake and Exhaust ValvesAir Filter Ring Service and AdjustmentsTo Replace or Clean Check Valve Nut Outlet Tube Pressure Relief Check ValveRegulator Tank Outlet Pressure PressureGauge Adapter To Replace RegulatorRegulator RingCover Regulator ArrowStorage Troubleshooting Pressure reading Check wiring connection Contenido GarantíaGarantía Total DE UN AÑO DEL Compresor DE Aire Lesiones serias Definiciones DE Normas DE SeguridadModelo Nº Propiedad.aInstrucciones Importantes DE Seguridad Guarde Estas InstruccionesAgregados Y Accesorios Códigos locales y federales, previo al Riesgo DE Caida Advertencia Riesgo DE Operación Insegura ¿QUÉ Puede OCURRIR? Ciclo DE Servicio GlosarioAccesorios AccesoriosEnsamblado Instalación Cómo Preparar LA UnidadUbicación del compresor de aire Cables de extensión eléctrica Protección del voltaje y del circuitoDescripción de operaciones OperaciónConozca su compresor de aire Válvula de Drenaje LaAntes del primer arranque Cómo utilizar su unidadCómo detenerla Válvula aliviadora de presión LaAntes de cada puesta en marcha Cómo poner en marchaCómo verificar la válvula de seguridad MantenimientoResponsabilidades del cliente Cómo drenar el tanqueFiltro de Aire Inspección y reemplazo Filtro de aireAro regulador Servicio Y AjustesPara reemplazar o limpiar la válvula de retención ConsolaPara reemplazar el regulador Almacenaje Riesgo Guía DE Diagnóstico DE ProblemasProblema Causa Corrección Alguna porque se debilitaráDesciende cuando Pintura por rociado. Vea la A00854 50- SP Product replacement if your covered product cant be fixed Repair Protection AgreementsGet it fixed, at your home or ours

919.16558 specifications

The Craftsman 919.16558 is a versatile and reliable air compressor designed to meet the demanding needs of both DIY enthusiasts and professional craftsmen alike. Engineered with performance and efficiency in mind, this compressor is an excellent addition to any workshop or job site, offering a broad range of applications from powering pneumatic tools to inflating tires.

One of the standout features of the Craftsman 919.16558 is its robust motor, providing a powerful performance that ensures quick recovery times and sustained pressure. With a maximum pressure of 150 psi, users can tackle heavy-duty tasks with ease, from nailing and stapling to spray painting and airbrushing. Its 6-gallon tank strikes an ideal balance between portability and efficiency, ensuring that users can easily transport the unit without sacrificing operational capacity.

The compressor is equipped with an oil-free pump, which significantly reduces maintenance requirements. This technology not only eliminates the need for regular oil changes but also prevents the risk of oil contamination in the air supply. This feature is particularly beneficial for applications where clean air is paramount, such as in spray painting projects or when operating tools that require a constant air supply.

Ease of use is another key characteristic of the Craftsman 919.16558. Its intuitive control panel includes a quick-release drain valve that facilitates easy water removal from the tank, ensuring optimal performance and longevity. Additionally, the integrated pressure gauge allows users to monitor the air pressure in real-time, enabling precise adjustments and enhancing overall user experience.

Safety is paramount, and the Craftsman 919.16558 comes with built-in safety features like an automatic shut-off that kicks in once the desired pressure is reached. This not only protects the compressor from over-pressurization but also provides peace of mind for users engaged in various tasks.

In terms of portability, the Craftsman compressor features a sturdy handle and lightweight design, making it effortless to maneuver around job sites or transport in vehicles. Its compact size allows for easy storage in workshops with limited space.

In summary, the Craftsman 919.16558 is a powerful, portable, and user-friendly air compressor that combines advanced technologies and essential features, making it a top choice for a wide range of applications. Whether you are a professional contractor or a weekend warrior, this compressor delivers the performance, reliability, and ease of use needed to get the job done efficiently.
Top Page Image Contents