Panasonic SC-PM54 specifications Radio, Manual tuning, Memory preset, AM allocation setting

RQTV0102

10

Radio

Numeric buttons

Manual tuning

1	Press [TUNER/BAND] to select “FM” or “AM”.
2	Press [PLAY MODE] to select “MANUAL”.
3	Press [4/REW/4] or [3/FF/¢] to select the
	frequency of the required station.

“ST” is displayed when a stereo FM broadcast is being received.

To tune automatically

Press [4/REW/4] or [3/FF/¢] for a moment until the frequency starts changing rapidly. The unit begins auto tuning, stopping when it fi nds a station.

•Auto tuning may not function when there is excessive interference.

•To cancel auto tuning, press [4/REW/4], [3/FF/¢] or [STOP 7].

To improve FM sound quality

Press and hold [PLAY MODE] to display “MONO”.

To cancel

Press and hold [PLAY MODE] again until “MONO” disappears.

•MONO is also cancelled if the frequency is changed.

•Turn off “MONO” for normal listening.

RDS broadcasting (For Europe)

Enable you to display the name of a broadcasting station or a program type.

Press [DISPLAY] to display:

Station Name (PS) Program Type (PTY) Frequency display

RDS displays may not be available if reception is poor.

Program type displays

NEWS	VARIED	FINANCE	COUNTRY
AFFAIRS	POP M	CHILDREN	NATIONAL
INFO	ROCK M	SOCIAL A	OLDIES
SPORT	M-O-R- M	RELIGION	FOLK M
EDUCATE	LIGHT M	PHONE IN	DOCUMENT
DRAMA	CLASSICS	TRAVEL	TEST
CULTURE	OTHER M	LEISURE	ALARM
SCIENCE	WEATHER	JAZZ

M-O-R- M = “Middle-of-the-road music”

Memory preset

Up to 15 stations can be set in both the FM and AM bands.

Preparation

Press [TUNER/BAND] to select “FM” or “AM”.

Automatic presetting

Press and hold [PROGRAM] to start presetting.

Manual presetting

1	Press [PLAY MODE] to select “MANUAL”.
2	Press [4/REW/4] or [3/FF/¢] to tune to the
	required station.
3	Press [PROGRAM].
4	Press numeric buttons to select a channel.
	The station occupying a channel is erased if another
	station is preset in that channel.
5	Repeat steps 2 to 4 to preset more stations.

Selecting a preset station

Press numeric buttons to select the channel.

For channels 10 to 15 press [h10], then the two digits.

OR

1	Press [PLAY MODE] to select “PRESET”.
2	Press [4/REW/4] or [3/FF/¢] to select the
	channel.

AM allocation setting

By main unit only

This system can also receive AM broadcasts allocated in 10 kHz steps.

To change the step to 9 kHz to 10 kHz

1 Press and hold [TUNER/BAND].

After a few seconds the display changes to a fl ashing display of the current minimum frequency.

2 Continue to hold down [TUNER/BAND].

•When the minimum frequency changes, release the button. To return to the original step, repeat the above steps.

•After the setting is changed, any previously preset frequency will be cleared.

RQTV0102_2B.indd 10 2/9/07 11:14:29 AM